Catalogs >
VSCom Germany >
669_data

669_data
4Pages

Catalog excerpts

Vision Systems GmbH - NetCom 413 VS Vision Systems GmbH / Part Number 669 Features Can control 4x RS232/422/485 devices located virtually anywhere (via Ethernet or Internet) q LAN interface 10BaseT/100BaseTx Ethernet q Driver automatically finds NetCom devices in the network q Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP q Automatic mode switching between Driver and Raw Mode q Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS q supports ART (Automatic Receive Transmit control) q RS232/422/485 interface selectable by Switches q Contact Online… NetCom 413 Quick Link: | Features | More Pictures | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Security | Ordering Information | Optional Accessories | More Pictures Klick on the thumbnails for the large picture … >Back to top Overview NetCom 413 is an industrial-strength network-based serial device server for connecting four RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom 413 can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation. The power consumption of NetCom 413 is very low, supply via Ethernet is available. Read background information and check an adapter. Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Retail system SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control Hardware Processor Connector type RJ45 for LAN, DSUB 9 male for serial Port >Back to top

Open the catalog to page 1

Vision Systems GmbH - NetCom 413 TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS Serial interface Available Modes RS232 full duplex RS422 full duplex RS485 4 wire, full duplex RS485 2 wire, half duplex, with echo RS485 2 wire, half duplex, without echo RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422: Tx+/-, Rx+/-, GND RS485 2 wire: Data+/-, GND RS485 4 wire: Tx+/-, Rx+/-, GND Controlled by ART (Automatic Receive Transmit control) or by RTS >Back to top Performance Speed None, even, odd, space, mark Data bits Stop bits Operating Modes Driver mode VScom Driver for Windows NT...

Open the catalog to page 2

Vision Systems GmbH - NetCom 413 167× 99×29 mm³ (W×L×H) 189×102×30 mm³ with DB9 connectors and ears Operating Temp Storage Temp SECC sheet metal (1mm) Special Features Installation Configuration utility automatically finds NetCom devices in the network Operating mode Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used. Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP special VScom MIB included...

Open the catalog to page 3

Vision Systems GmbH - NetCom 413

Open the catalog to page 4

669_data 4Pages

Catalog excerpts

All VSCom Germany catalogs and technical brochures

669_data
4Pages