Catalogs >
VSCom Germany >
6664_data

6664_data
6Pages

Catalog excerpts

Vision Systems GmbH - NetCom 111 PoE VS Vision Systems GmbH / Part Number 6664 Features Can control 1x RS232 devices located virtually anywhere (via Ethernet or Internet) q LAN interface 10BaseT/100BaseTx Ethernet q Powered over Ethernet IEEE 802.3af q Driver automatically finds NetCom devices in the network q Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP q Automatic mode switching between Driver and RAW Mode q Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS q Now on stock q Contact Online… NetCom 111 PoE Quick Link: | Features | More Pictures | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Security | Ordering Information | Optional Accessories | More Pictures Klick on the thumbnails for the large picture … >Back to top Overview NetCom 111 PoE is an industrial-strength network-based serial device server for connecting one RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP. On NetCom 111 PoE the feature of PoE (Power-over-Ethernet, IEEE 802.3af) allows to supply the NetCom via the Ethernet cable. This simplifies the cable connections on hard-to-reach locations. An external power adapter is not required, but available as an optional accessory. Read background information. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom 111 PoE can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation. The serial connector is pin-compatible to Com1 on a PC. Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Retail system SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control Hardware Processor

Open the catalog to page 1

Vision Systems GmbH - NetCom 111 PoE Connector type RJ45 for LAN, DSUB 9 female for serial Port >Back to top TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS Serial interface Available Modes TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND >Back to top Performance Speed None, even, odd, space, mark Data bits Stop bits Operating Modes Driver Mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol. Raw data transfer over TCP/IP. Accepts multiple incoming connections. Raw data...

Open the catalog to page 2

Vision Systems GmbH - NetCom 111 PoE 73×115×27 mm³ (W×L×H) 101×121×27 mm³ with DB9 connector and ears Operating Temp Storage Temp SECC sheet metal (1mm) Special Features Installation Configuration utility automatically finds NetCom devices in the network Operating mode Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used. Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP special VScom MIB...

Open the catalog to page 3