Catalogs >
VSCom Germany >
666_data

666_data
6Pages

Catalog excerpts

Vision Systems GmbH - NetCom 113 VS Vision Systems GmbH / Part Number 666 Features Can control 1x RS232/422/485 devices located virtually anywhere (via Ethernet or Internet) q New: Serial port DB9 male q LAN interface 10BaseT/100BaseTx Ethernet q Driver automatically finds NetCom devices in the network q Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP q Automatic mode switching between Driver and Raw Mode q Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS q supports ART (Automatic Receive Transmit control) q RS232/422/485 interface selectable by Switches q Contact Online… NetCom 113 Quick Link: | Features | More Pictures | Overview | Application | Hardware | Interface | Performance | Operating Modes | Power and Environment | Special Features | Security | Ordering Information | Optional Accessories | More Pictures Klick on the thumbnails for the large picture … >Back to top Overview NetCom 113 is an industrial-strength network-based serial device server for connecting one RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom 113 can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation. New: The serial connector is pin-compatible to Com1 on a PC, as DB9 male. The RS232 Null-Modem Adapter is no longer required. The power consumption of NetCom 113 is very low, supply via Ethernet is available. See the option, read background information, or check an adapter. Application Industrial / Factory / Laboratory automation Automatic warehouse control system Wafer fabrication system Retail system SCADA system Building automation system Self-service banking system Other remote and distributed serial devices control Hardware Processor

Open the catalog to page 1

Vision Systems GmbH - NetCom 113 Connector type RJ45 for LAN, DSUB 9 female for serial Port >Back to top TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS Serial interface RS232/422/485 switchable New: Connector DB9 male, not female Available Modes RS232 full duplex RS422 full duplex RS485 4 wire, full duplex RS485 2 wire, half duplex, with echo RS485 2 wire, half duplex, without echo RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422: Tx+/-, Rx+/-, GND RS485 2 wire: Data+/-, GND RS485 4 wire: Tx+/-, Rx+/-, GND Controlled by ART (Automatic Receive Transmit control) or by RTS >Back...

Open the catalog to page 2

Vision Systems GmbH - NetCom 113 Power and Environment Power requirements Power supply Adapter 73×115×27 mm³ (W×L×H) 101×121×27 mm³ with DB9 connector and ears Operating Temp Storage Temp SECC sheet metal (1mm) Special Features Installation Configuration utility automatically finds NetCom devices in the network Operating mode Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used. Configuration over Driver Panels, NetCom Manager, WEB...

Open the catalog to page 3