Catalog excerpts
vpr Power Your Critical Mission Today A SVRSA2800S SERIES o-oSPACE QUALIFIED HYBRID DC-DC CONVERTERS Models Available Input: 18 V to 40 V continuous, 50 V transient 6 W, single output of 3.3 V, 5 V, 12 V, 15 V Qualified to MIL-PRF-38534 Class H and Class K SVRSA Series DC-DC Converter 1.0 DESCRIPTION The SVRSA Series of space qualified DC-DC converters is specifically designed for the harsh radiation environment of space applications and is designed in accordance with Aerospace TOR requirements. Performance is guaranteed through the use of hardened semiconductor components, radiation lot acceptance testing (RLAT) of non-hardened components, and analysis. The SVRSA Series has been characterized for Total Ionizing Dose (TID) performance including Enhanced Low Dose Rate Sensitivity (ELDRS) and for Single Event Effects (SEE) according to VPT's DLA-approved Radiation Hardness Assurance (RHA) plan per MIL-PRF-38534, Appendix G, Level R. Characterization is performed at both the component level and at the SVRSA Series hybrid converter level. The SVRSA Series of DC-DC converters is radiation hardened and suited for use in low Earth orbit (LEO), medium Earth orbit (MEO), geostationary orbit (GEO), deep space, and launch vehicle programs. 1.1 FEATURES • Up to 6 W output power • Wide input voltage range: 18 V to 40 V plus 50 V transient • Continuous operation over full military temperature range of -55 °C to +125 °C with no power derating • Very low output noise • Radiation immune magnetic feedback circuit • No use of optoisolators • Undervoltage lockout • Current limit protection / short circuit protection 1.2 SPACE LEVEL CHARACTERIZATIONS • Guaranteed TID performance to 100 krad(Si) including ELDRS • SEE performance to 85 MeV/mg/cm2. Transients are fully characterized for cross section and magnitude • Worst-case analysis, stress, radiation, reliability reports available 1.3 MANUFACTURING AND COMPLIANCE • Qualified to MIL-PRF-38534 Class H and Class K, DLA SMD 5962-15217 • Available compliant to MIL-HDBK-1547 and Aerospace TOR component level element evaluation • MIL-PRF-38534 element evaluated components • MIL-STD-461 C/D/E/F when used with appropriate VPT EMI filter • Manufactured in a MIL-PRF-38534 Class H and Class K facility • MIL-STD-883 • ISO-9001 1.4 PACKAGING • Low-profile: 2.00” x 1.130” x 0.355” • Max weight: 27 g • Industry standard pinout • Precision projection-welded hermetic metal case • Flanged and Non-flanged versions available 1.5 SIMILAR PRODUCTS AND ACCESSORIES • SVSA 6 W space qualified DC-DC converter, 30 krad(Si) • Custom versions available • EMI filters • Non-isolated, space qualified point of load converters • Use with Thermal Pad TP-002 Products and reports described in this datasheet are subject to all export license restrictions and regulations which may include but are not limited to ITAR (International Traffic in Arms Regulations) and the Export Administration and Foreign Assets Control Regulations. Further restrictions may apply. Contact VPT sales for details.
Open the catalog to page 1SVRSA2800S Series 2.0 DIAGRAMS 2.1 BLOCK DIAGRAM D1 UNDER VOLTAGE SHUTDOWN PRIMARY HOUSEKEEPING SUPPLY VOLTAGE AND CURRENT AMPLIFIERS MAGNETIC FEEDBACK SECONDARY HOUSEKEEPING SUPPLY 2.2 CONNECTION DIAGRAM SVRMH28 EMI FILTER 1 3.0 SPECIFICATIONS 3.1 ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings Input Voltage (Continuous): Input Voltage (Transient, 1 second): ESD Rating per MIL-PRF-38534: Sales Information Operating Temperature (Full Load): Storage Temperature: Lead Solder Temperature (10 seconds):
Open the catalog to page 2vpr Power Your Critical Mission Today O- Tcase = -55 °C to +125 °C, Vin = +28 V ± 5%, Full Load, Unless Otherwise Specified Parameter Conditions Min Typ Max Min Typ Max Units 1. Time for output voltage to settle within 1% of steady-state value 2. Verified by initial electrical design verification. Post design verification, parameter shall be guaranteed to the limits specified 3. End-of-Life performance includes aging and radiation degradation and is within standard limits except where noted 4. 37.5 V Max continuous to be compliant to MIL-HDBK-1547 and Aerospace TOR Sales Information...
Open the catalog to page 3vpr Power Your Critical Mission Today O- Tcase = -55 °C to +125 °C, Vin = +28 V ± 5%, Full Load, Unless Otherwise Specified Parameter Conditions Min Typ Max Min Typ Max Units 1. Time for output voltage to settle within 1% of steady-state value 2. Verified by initial electrical design verification. Post design verification, parameter shall be guaranteed to the limits specified 3. End-of-Life performance includes aging and radiation degradation and is within standard limits except where noted 4. 37.5 V Max continuous to be compliant to MIL-HDBK-1547 and Aerospace TOR Sales Information...
Open the catalog to page 4SVRSA2800S Series 4.0 PERFORMANCE CURVES 4.1.1 SVRSA283R3S Efficiency (Typical, 25 °C) Sales Information
Open the catalog to page 5SVRSA2800S Series 5.0 MECHANICAL OUTLINES AND PINOUT Non-Flanged Package Option: 0.250in±0.015 BASEPLATE SURFACE 1. Tolerances are +0.005” unless otherwise stated 2. Case temperature is measured on the center of the baseplate surface 3. Materials: Case (Steel, gold over nickel plated); Cover (Steel, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass) Sales Information
Open the catalog to page 6SVRSA2800S Series 5.0 MECHANICAL OUTLINES AND PINOUT (CONTINUED) Flanged Package Option: 2.000in 50.80mm MAX BASEPLATE SURFACE Tolerances are +0.005” unless otherwise stated Case temperature is measured on the center of the baseplate surface Mounting holes are not threaded. Recommended fastener is 4-40 Materials: Case (Steel, gold over nickel plated); Cover (Steel, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass) Sales Information
Open the catalog to page 7SVRSA2800S Series 6.0 TECHNICAL NOTES Please note that many of these functions are also demonstrated in detail on the VPT website in the form of technical video labs. 6.1 GENERAL INFORMATION 6.1.1 Topology Description The SVRSA2800S Series is an isolated single-output flyback converter. It operates over a wide input voltage range and provides a tightly regulated positive output voltage with respect to the OUTCOM pin. Feedback isolation is accomplished using VPT’s proprietary magnetic feedback technology. The converter regulates with zero load, and no minimum load is required. 6.1.2 External...
Open the catalog to page 8All VPT Inc catalogs and technical brochures
-
VHRF1-28 SERIES
7 Pages
-
HTD1R5N-2800D SERIES
12 Pages
-
HTD1R5B-1200D SERIES
11 Pages
-
SVCL2800S SERIES
13 Pages
-
SVRME28 Series
8 Pages
-
SVRMC28 Series
8 Pages
-
SVRMH28 Series
8 Pages
-
SVGA0515SG SERIES
13 Pages
-
SVGA0515S SERIES
11 Pages
-
SVFA0515SG SERIES
13 Pages
-
SVFA0515S SERIES
11 Pages
-
SVPL3R312SG SERIES
15 Pages
-
SVGA0510SG SERIES
13 Pages
-
SVGA0510S SERIES
11 Pages
-
SVFA0510SG SERIES
13 Pages
-
SVFA0510S SERIES
11 Pages
-
SVPL1209SG SERIES
17 Pages
-
SVRGA0508S SERIES
11 Pages
-
SVPL3R306SG SERIES
15 Pages
-
SGRB10028S SERIES
2 Pages
-
SVFL2800D SERIES
19 Pages
-
SVFL2800S SERIES
16 Pages
-
SVRFL2800D SERIES
16 Pages
-
SVRFL2800S SERIES
16 Pages
-
SVRTR2800D SERIES
14 Pages
-
SVTR2800D SERIES
15 Pages
-
SVTR2800S SERIES
16 Pages
-
SVHF2800D SERIES
15 Pages
-
SVHF2800S SERIES
17 Pages
-
SVRHF2800D SERIES
15 Pages
-
SVRHF2800S SERIES
14 Pages
-
SVSA2800D SERIES
14 Pages
-
SVSA2800S SERIES
14 Pages
-
DVWR2800T Series
14 Pages