Catalog excerpts
vpr Power Your Critical Mission Today Models Available Input: 16 V to 40 V continuous, 50 V transient 120 W, dual outputs of ±5 V, ±12 V, ±15 V Qualified to MIL-PRF-38534 Class H and Class K 1.0 DESCRIPTION The SVFL Series of space qualified DC-DC converters is specifically designed for the harsh radiation environment of space applications. Performance is guaranteed through the use of hardened semiconductor components, radiation lot acceptance testing (RLAT) of non-hardened components, and analysis. The SVFL Series has been characterized for Total Ionizing Dose (TID) performance including Enhanced Low Dose Rate Sensitivity (ELDRS) and for Single Event Effects (SEE) according to VPT's DLA-approved Radiation Hardness Assurance (RHA) plan per MIL-PRF-38534, Appendix G, Level P. Characterization is performed at both the component level and at the SVFL Series hybrid converter level. The SVFL Series of DC-DC converters is radiation tolerant and suited for use in low Earth orbit (LEO), medium Earth orbit (MEO), geostationary orbit (GEO), deep space, and launch vehicle programs. 1.1 FEATURES • Up to 120 W output power • Wide input voltage range: 16 V to 40 V plus 50 V transient • Continuous operation over full military temperature range of -55 °C to +125 °C with no power derating • Very low output noise • Parallel up to 5 units with current sharing • Output voltage trim up +10% or down -20% • Radiation immune magnetic feedback circuit • No use of optoisolators • Undervoltage lockout • Current limit protection / short circuit protection 1.2 SPACE LEVEL CHARACTERIZATIONS • Guaranteed TID performance to 30 krad(Si) including ELDRS • SEE performance to 44 MeV-cm2/mg. Transients are fully characterized for cross section and magnitude • Worst-case analysis, stress, radiation, reliability reports available 1.3 MANUFACTURING AND COMPLIANCE • Qualified to MIL-PRF-38534 Class H and Class K, DLA SMD # 5962-11214 • MIL-PRF-38534 element evaluated components • MIL-STD-461 C/D/E/F when used with appropriate VPT EMI filter • Manufactured in a MIL-PRF-38534 Class H and Class K facility • MIL-STD-883 • ISO-9001 1.4 PACKAGING • Low-profile: 3.005” x 1.505” x 0.400” • Max weight: 88 g • Industry standard pinout • Precision seam-welded hermetic metal case • Standard and optional side-flanged versions available 1.5 SIMILAR PRODUCTS AND ACCESSORIES • SVFL 120 W single output DC-DC converter • SVRFL 100 W dual space qualified DC-DC converter, 100 krad(Si) • Custom versions available • EMI filters • Non-isolated, space qualified point of load converters • Use with Thermal Pad TP-001
Open the catalog to page 1SVFL2800D Series 2.0 DIAGRAMS 2.1 BLOCK DIAGRAM +VOUT -VOUT INCOM Q1 VOLTAGE AND CURRENT AMPLIFIERS MAGNETIC FEEDBACK UNDER VOLTAGE SHUTDOWN SHARE PRIMARY HOUSEKEEPING SUPPLY SECONDARY HOUSEKEEPING SUPPLY +VOUT - VOUT 3.0 SPECIFICATIONS 3.1 ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings Input Voltage (Continuous): Input Voltage (Transient, 1 second): ESD Rating per MIL-PRF-38534: Sales Information Operating Temperature (Full Load): Storage Temperature: Lead Solder Temperature (10 seconds): E-mail: vptsales@vptpower.com
Open the catalog to page 2vpr Power Your Critical Mission Today O- Parameter Conditions Min Typ Max Min Typ Max Units 1. Half load at +Vout and half load at -Vout 2. Up to 70% of the total power or current can be drawn from either of the two outputs 3. Time for output voltage to settle within 1% of steady-state value 4. Verified by qualification testing 5. End-of-Life performance includes aging and radiation degradation and is within standard limits except where noted 7. 5% load to Full Load at -55 °C Sales Information Phone:(425) 353-3010 Fax: (425) 353-4030E-mail: vptsales@vptpower.com Web: www.vptpower.com
Open the catalog to page 3vpr Power Your Critical Mission Today O- Parameter Conditions Min Typ Max Min Typ Max Units 1. Half load at +Vout and half load at -Vout 2. Up to 70% of the total power or current can be drawn from either of the two outputs 3. Time for output voltage to settle within 1% of steady-state value 4. Verified by qualification testing 5. End-of-Life performance includes aging and radiation degradation and is within standard limits except where noted 7. 5% load to Full Load at -55 °C Sales Information Phone:(425) 353-3010 Fax: (425) 353-4030E-mail: vptsales@vptpower.com Web: www.vptpower.com
Open the catalog to page 4vpr Power Your Critical Mission Today O- Parameter Conditions Min Typ Max Units 1. Half load at +Vout and half load at -Vout 2. Up to 70% of the total power or current can be drawn from either of the two outputs 3. Time for output voltage to settle within 1% of steady-state value 4. Verified by qualification testing 5. End-of-Life performance includes aging and radiation degradation and is within standard limits except where noted 7. 5% load to Full Load at -55 °C Sales Information Phone:(425) 353-3010 Fax: (425) 353-4030E-mail: vptsales@vptpower.com Web: www.vptpower.com
Open the catalog to page 5vpr Power Your Critical Mission Today O- Parameter Conditions Min Typ Max Units 1. Half load at +Vout and half load at -Vout 2. Up to 70% of the total power or current can be drawn from either of the two outputs 3. Time for output voltage to settle within 1% of steady-state value 4. Verified by qualification testing 5. End-of-Life performance includes aging and radiation degradation and is within standard limits except where noted 7. 5% load to Full Load at -55 °C Sales Information Phone:(425) 353-3010 Fax: (425) 353-4030E-mail: vptsales@vptpower.com Web: www.vptpower.com
Open the catalog to page 6SVFL2800D Series 4.0 PERFORMANCE CURVES 4.1.1 SVFL2805D Efficiency (Typical, 25 °C) Sales Information E-mail: vptsales@vptpower.com
Open the catalog to page 7Power Your Critical Mission Today O- SVFL2800D Series 4.0 PERFORMANCE CURVES (CONTINUED) 4.2.1 SVFL2805D Cross-Regulation (Typical, 25 °C) -4.2 Sales Information
Open the catalog to page 8vpr Power Your Critical Mission Today O- BASEPLATE SURFACE 1. Tolerances are +0.005” unless otherwise stated 2. Case temperature is measured on the center of the baseplate surface 3. Mounting holes are not threaded. Recommended fastener is# 4-40 screw 4. Materials: Case (Steel, gold over nickel plated); Cover (Kovar, nickel plated); Pin (Copper-cored alloy 52, gold over nickel plated); Pin Seals (Glass) Sales Information Phone:(425) 353-3010 Fax: (425) 353-4030E-mail: vptsales@vptpower.com Web: www.vptpower.com SVFL2800D - 7.0 Page 9
Open the catalog to page 9All VPT Inc catalogs and technical brochures
-
VHRF1-28 SERIES
7 Pages
-
HTD1R5N-2800D SERIES
12 Pages
-
HTD1R5B-1200D SERIES
11 Pages
-
SVCL2800S SERIES
13 Pages
-
SVRME28 Series
8 Pages
-
SVRMC28 Series
8 Pages
-
SVRMH28 Series
8 Pages
-
SVGA0515SG SERIES
13 Pages
-
SVGA0515S SERIES
11 Pages
-
SVFA0515SG SERIES
13 Pages
-
SVFA0515S SERIES
11 Pages
-
SVPL3R312SG SERIES
15 Pages
-
SVGA0510SG SERIES
13 Pages
-
SVGA0510S SERIES
11 Pages
-
SVFA0510SG SERIES
13 Pages
-
SVFA0510S SERIES
11 Pages
-
SVPL1209SG SERIES
17 Pages
-
SVRGA0508S SERIES
11 Pages
-
SVPL3R306SG SERIES
15 Pages
-
SGRB10028S SERIES
2 Pages
-
SVFL2800S SERIES
16 Pages
-
SVRFL2800D SERIES
16 Pages
-
SVRFL2800S SERIES
16 Pages
-
SVRTR2800D SERIES
14 Pages
-
SVTR2800D SERIES
15 Pages
-
SVTR2800S SERIES
16 Pages
-
SVHF2800D SERIES
15 Pages
-
SVHF2800S SERIES
17 Pages
-
SVRSA2800S SERIES
14 Pages
-
SVRHF2800D SERIES
15 Pages
-
SVRHF2800S SERIES
14 Pages
-
SVSA2800D SERIES
14 Pages
-
SVSA2800S SERIES
14 Pages
-
DVWR2800T Series
14 Pages