Celtron • Revere • Sensortronics • Tedea-Huntleigh Weight Indicator FEATURES • High performance and long-term reliability • Assembly “snap-on” DIN rail (certified to EN50022 standards) • Able to interface with intrinsically safe barriers for use in hazardous areas OPTIONS • Ethernet version available • RS485 full duplex output available • PROFINET version available APPLICATIONS • Various industrial systems DESCRIPTION The WT2 is a modified version of the WT1 with improved interfacing abilities. It uses the same 24-bit D/A converter and, when connected to a system of 1-4 load cells, the WT2 converts output signals in the same manner as the WT1. The WT2’s strength is in its connectivity. It uses PROFIBUS as its default protocol, which is faster than the MODBUS protocol and able to control more complex systems. The WT2 also features an optional Ethernet connection, which comes with a 128-byte in/out buffer for high-speed PC connections. The Ethernet cable can be augmented with the PROFINET protocol, which enables full integration into systems with that protocol. Technical contact: [email protected], [email protected], and [email protected]

Weight Indicator WIRING DIAGRAM CONNECTION OPTIONS LOCATED HERE (SEE BELOW) Connections depend upon selected output options CONNECTION OPTIONS Ethernet and PROFINET Connection Technical contact: [email protected], [email protected], and [email protected] PROFIBUS Connection

Celtron • Revere • Sensortronics • Tedea-Huntleigh SPECIFICATIONS PERFORMANCE Power Output 4 V Measuring Range -4 to +4 mV/V Input Sensitivity 0.02 pV/division Linearity <0.01% of full scale Gain Drift <0.001% full scale °C D/A Convertor 24 bit Internal Resolution 16,000,000 counts Visible Resolution 60,000 counts (visible on net weight) Divisions Value (Adjustable) 0.001 to 50 Filter (Adjustable) 0.2 to 25 Hz Weight Indicator ELECTRICAL Voltage 24±10% VDC Wattage 2 W ENVIRONMENTAL Operating Temperature -10 to +50 °C Storage Temperature -20 to +60 °C DISPLAY AND KEYBOARD Display 5 digit, 7 segment,...

Weight Indicator ORDERING INFORMATION FOR WT2 MOD - O MODEL PBUS = PROFIBUS DP-V1 interface PNET = PROFINET interface ETH Example Completed Part Numbers: WT2-ETH is the part number for a WT2 with an Ethernet interface. *This is mandatory: customers must select an output option. All speciications subject to change without notice. For inquiries within Italy please contact the VPG Transducers Marketing Department directly using the email address [email protected]. Technical contact: [email protected], [email protected], and [email protected]

Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes...