Hermetically Sealed Stainless Steel Shear Beam Load Cell FEATURES Rated capacities of 1000 to 10,000 pounds 500 kg to 5 metric tonnes Stainless steel, welded seal construction Interchangeable with Sensortronics model 65023 shear beam Trade certiied for NTEP Class III: 5000 Divisions and Class IIIL: 10000 Divisions; OIML R60: 3000 Divisions Hermetically Sensorgage™ sealed to IP68 standards Cell Guard™ two year warranty Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!) Optional - Companion weigh module is Model 65080 Stainless Steel TantaMount Its low proile and fully welded sealing combined with high accuracy makes this load cell ideally suited for low proile platforms, pallet truck weighers, tanks and silos. The guide slots incorporated into the upper and lower mounting faces enable manufacturers to easily position the load cell. APPLICATIONS Hostile environments: Food and beverage processing Chemical and plastics processing Pharmaceutical and biomedical processing Washdown and Clean-In-Place environments High performance weighing modules and assemblies Hermetically sealed against moisture, the construction of the model 65083H, in combination with a polyurethane dual shielded cable, enables continuous operation in demanding environments while maintaining a high operating speciication. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. The Model 65083H provides the weighing industry with the ultimate protection necessary for today’s hostile environments in an economical, low proile range suitable for platform scale manufacture. OUTLINE DIMENSIONS in inches [millimeters] DIAMETER F THRU, 2 PLACES Wiring + Excitation = Red – Excitation = Black + Output = Green – Output = White 4 CONDUCTOR; 22 AWG CABLE; SHIELDED AND JACKETED; 20 FOOT STANDARD LENGTH OR PER SALES ORDER. WELDED STAINLESS STEEL COVERS, TYPICAL A2 HERMETICALLY SEALED CONDUIT ADAPTOR 1/2-14 NPT ARROW INDICATES DIRECTION OF LOAD (+) FOR POSITIVE POLARITY Capacities are in pounds. Deflection is ±10%. Certified drawings are available. * SE denotes “Small Envelope”. A 5k capacity is available in the 1k/4k dimensional envelope. Technical contact: [email protected], [email protected], and vpgt.em

Model 65083H Sensortronics Hermetically Sealed Stainless Steel Shear Beam Load Cell SPECIFICATIONS PARAMETER Rated capacity—R.C. (Emax) NTEP/OIML accuracy class Maximum no. of intervals (n) Y = Emax/Vmin Rated output—R.O. Rated output tolerance Zero balance Combined error Non-repeatability Creep error (30 minutes) Temperature effect on zero Temperature effect on output Compensated temperature range Operating temperature range Storage temperature range Sideload rejection ratio Safe sideload Maximum safe central overload Ultimate central overload Excitation, recommended Excitation, maximum Input...

Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes...