Material data sheet Material data sheet voxeljet 3D printers Plastic Base material PMMA particle material (55 μm) PMMA particle material (85 μm) Tensile strength Yield point Burn-out temperature investment casting; design models investment casting sharp edges; for highest accuracy and true-to-detail; reusable particle material white colour; good for dyeing; burns out very well; reusable particle material Technical data plastic parts › Can be used for prototypes, illustrative models or lost Layer thickness › Precise layering & high accuracy › Components of high complexity Suitable finishing treatment Wax Tensile strength Softening temp. smooth liquid, resistant surface › Economical production in batch sizes of one as well as in solid material, dyeable series production › Infiltration in any colour › Perfect for investment casting because of the base material PMMA › Any hybrid design and combination with conventional Base material raw silica sand, Cerabeads silica sands of various grain sizes Phenolic resin Cold hardening furan resin Bending strength ≥ 220 N/cm2 (depending on the sand or binder) Sand casting of almost all Sand casting of almost all alloys, especially steel or alloys. iron alloys. low gas shock, sand Largest build volumes, almost 100% recyclable, fast build rates, most easy unpacking and highwidely used. est edge sharpness. › Complex cores manufactured and reproduced in one piece › High flexibility with regard to quantity and mold design › Close-to-production mold and casting properties › Economical from prototype to small series production Technical data sand parts Layer thickness Warranty/Disclaimer: The performance characteristics of these products may vary according to every individual case. voxeljet assumes no liability for the actual marketability of the products, as well as for the applicability of the products in individual cases. ©voxeljet. All rights reserved. The designations voxeljet, VX200, VX500, VX1000, VX2000 and VX4000 are registered trademarks of voxeljet AG. Specifications subject to change without notice. Validity: 01/2021. voxeljet is ISO 9001 - certified.