Material data sheet for PPC2 PRINTING PROCESS Available system(s) Build space Layer thickness Print resolution POST PROCESS Medium grain size Drying time in jobbox ADVANTAGES OF PPC 2 MODELS Increased resolution (sharp edges) Suitable for autoclaves, even for thin-walled parts Improved surface quality Easy burnout with almost no residual ash Same handling as for conventional wax parts after wax infiltration No shell cracking due to negative coefficient of thermal expansion. No heat distortion as hardening process is purely a chemical process Coloured display models through epoxy infiltration Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with end use. voxeljet makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for aparticular use. ©voxeljet. All rights reserved. The designations voxeljet, VX200, VX500, VX1000, VX2000 and VX4000 are registered trademarks of voxeljet AG. Specifications subject to change without notice. Validity: 11/2017. We reserve the right to make technical changes. voxeljet is ISO 9001 - certified. voxeljet AG Paul - Lenz -Straße 1a 86 316 Friedberg Germany Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with end use. voxeljet makes no warranties Tel type, express - 7483 - 100 but not 49 to, the warranties of merchantability or fitness for a particular use. ©voxeljet. All rights reserved. Specifications subject to change without notice. of any+ 49 821or implied, including,Fax +limited821 7483 111 info @ voxeljet.com www.voxeljet.com Americas EMEA AsiaP

VX200 PPC2 The VX200 PPC2 is an affordable entry into 3D printing for investment casting foundries with an efficient part production for commercial castings such as turbine impellers and turbine blades. The new PPC2 is a modified version of the existing PolyPor PMMA processes, printing at an overall increased resolution. The improved surface quality and sharp edges on the parts are related to a finer PMMA particulate material of 37 µm (0,037 mm) average grain size, which enables printing at a reduced layer thickness of 100 µm. System Features Technical Data Improved surface quality due to finer...