*mydirectindustry

Catalogs
Voortman Steel Machinery
V550-7 - Machine Specifications

V550-7 - Machine Specifications

Product catalog summary

General Specifications
The V550-7 machine is designed to handle flat and angle steel with varying dimensions. It supports flat steel ranging from 50 x 5 mm to 500 x 25 mm and angle steel from 50 x 5 mm to 200 x 16 mm. The machine can position weights up to 750 kg and accommodate raw material lengths of 6 to 15 meters, depending on configuration. The working height is set at 940 mm.

Positioning and Hydraulic System
The machine uses a servo motor for positioning, achieving speeds of 75 m/min when empty and 15 m/min when loaded. It features a hydraulic unit with a power of 30 kW and a pressure of 275 bar, providing a flow rate of 280 L/min.

Punching and Drilling Capabilities
The vertical punch has a capacity of 110 tonnes, with maximum diameters varying based on material strength. The horizontal punch has a capacity of 85 tonnes. An optional drill unit offers a nominal power of 200 Nm and supports drill diameters from 5 to 40 mm.

Shearing Specifications
The flat shear can handle materials up to 500 x 25 mm, with a capacity of 245 tonnes. The angle shear supports dimensions up to 200 x 200 x 16 mm. The hydraulic marking unit can imprint numbers with a depth of 1 mm and a height of 10 mm.

Conveying and Sorting Options
An optional upfeed conveyor belt can handle products up to 750 mm. Remnants are managed based on size, with smaller pieces being redirected to the infeed or outfeed systems. An optional sorting system includes 13 bins for organized output.

Catalog excerpts

Machine specifications General Flat steel Angle steel Positioning weight Maximum length of raw material Minimum length of raw material (automatic infeed) Minimum waste length Working height Servo motor Positioning speed (empty) - truck m/min f/min Positioning speed (loaded – max. 750kg) m/min f/min Maximum acceleration (empty) - truck Hydraulic unit Hydraulic pressure Hydraulic flow L/min Gal/min Hydraulic numbering (standard) and/or milling (optional tool) Vertical punches

Open the catalog to page 1

Horizontal punches Drilling units Tool changer Drill holder V550-7 | Machine Specifications Machine specifications Vertical punch Punch capacity tonnes tons Max. diameter vertical punch (510 N/mm²) Max. diameter vertical punch (430 N/mm²) Max. diameter vertical punch (360 N/mm²) Slug container size Minimum punch diameter - vertical Max. diameter horizontal punch (510 N/mm²) Max. diameter horizontal punch (430 N/mm²) Max. diameter horizontal punch (360 N/mm²) Punch capacity tonnes tons Minimum punch diameter - horizontal Nominal drilling power Drill diameter Thread tapping Horizontal punch Drill...

Open the catalog to page 2

Machine specifications Shear Flat shear (45°) tonnes tons Flat shear capacity 510 N/mm² Flat shear capacity 430 N/mm² Flat shear capacity 360 N/mm² Angle shear tonnes tons Angle shear capacity 510 N/mm² Angle shear capacity 430 N/mm² Angle shear capacity 360 N/mm² Hydraulic marking unit VN1/36 (Standard) Marking numbers at once Marking numbers on disk Imprint depth Imprint height Upfeed conveyor belt (Optional) ≤750 mm / 30 inch* *Products larger are transported on the roller conveyor. Product size Remnants smaller than 350 mm are transported back to infeed and dropped in bin underneath infeed...

Open the catalog to page 3

All Voortman Steel Machinery catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list