ECR18E
1 /8Pages

ECR18E

ECR18E
1 /8Pages

Catalog excerpts

ECR18E-1

Volvo Construction Equipment Building Tomorrow ECR18E Volvo Compact Excavators 1.7-1.98 t 16.3 hp

 Open the catalog to page 1
ECR18E-2

Ready for work The ultra-short swing radius ECR18E is the perfect choice for working in tight conditions. Easy to transport and easy to operate, this 1.8t excavator will make light work of tough jobs. With a robust design, combined with best-in-class service access, you can be sure this is a machine designed to promote low operating costs. Best-in-class serviceability The unique high-profile counterweight design is made from three strong pieces of cast iron which wrap around the rear of the machine, protecting all vital components. All-around steel panels, recessed 10mm from the counterweight,...

 Open the catalog to page 2
ECR18E-3

Compact by design For superior versatility when working in confined spaces, the ECR18E features an ultra-short tail radius. The machine design ensures that the frame corner, swing post and cylinder stay within the tracks when digging alongside obstacles. The result is maximum visibility and a reduced risk of machine damage when working in tight conditions.

 Open the catalog to page 3
ECR18E-4

• High visibility entry step, orange seatbelt A VOLVO EXCLUSIVE • Controls lock options (switch, seat operator presence or buckled seatbelt sensor) A VOLVO EXCLUSIVE • 4 large easily accessible tie-down points on the upper frame NEW • Outstanding all-around stability • ROPS/TOPS/FOPS certified 4-pillar canopy SMALL BUT TOUGH • All-around steel panels NEW • High-profile cast counterweight A VOLVO EXCLUSIVE • Boom cylinder on top • Protected hoses, routed inside the boom • Fingertip controls A VOLVO EXCLUSIVE • Simple controls layout • Uncluttered floor, large travel pedals • Automatic 2-speed...

 Open the catalog to page 4
ECR18E-5

Compact by design • Ultra-short swing radius NEW • Variable undercarriage width, less than 1-meter wide • In-track boom swing Maximize profitability • Best-in-class access to engine compartment thanks to hinged fuel tank A VOLVO EXCLUSIVE • Auto engine shutdown and auto-idle (options) A VOLVO EXCLUSIVE • 50-hour greasing intervals The complete package • Genuine Volvo Parts • Full range of matched Volvo A

 Open the catalog to page 5
ECR18E-6

Max. torque at engine speed No. of cylinders Displacement Bore Stroke AlternatorV/Ah12/40 Swing system Max, slew speed r/min 9.5 Max, slew torquedaNm243 Undercarriage Bottom/top rollers per side 3 / 0 Track tension By grease piston Digging Performances Standard bucket width (blade, W/O side cutter) mm 450 Standard bucket mass kg 33 Standard bucket rated capacity l 36 Bucket breakout force (ISO) daN 1 290 Short arm tearout force (ISO) daN 795 Long arm tearout force (ISO) daN 695 Weight and Ground Pressure Operating weight according to ISO 6016 kg 1...

 Open the catalog to page 6
ECR18E-7

p2 Maximum boom offset to the left mm 640 STANDARD EQUIPMENT Engine Low emission, water-cooled, Volvo 3-cylinder diesel engine, meeting EPA Tier 4 and EU Stage V environmental regulations Starter motor protected against ignition when engine is already running Automatic engine cut-off in case of overheating or low oil level Engine starting safety device: the left console must be raised to operate the starter Drivetrain Automatic two-speed travel hydraulic motors with reduction gears Inner flange bottom rollers lubricated for life Electric / Electronic control system Maintenance-free battery IP67...

 Open the catalog to page 7
ECR18E-8

VOLVO Volvo Construction Equipment volvoce.com

 Open the catalog to page 8

All Volvo Construction Equipment catalogs and technical brochures

  1. ECR58

    16  Pages

  2. ECR58D

    20  Pages

  3. EW60E

    20  Pages

  4. ECR88D

    24  Pages

  5. EC950E

    24  Pages

  6. ECR355E

    36  Pages

  7. EW180E, EW220E

    32  Pages

  8. EW240E

    20  Pages

  9. EC27D

    12  Pages

  10. A25G

    20  Pages

  11. MC60C

    24  Pages

  12. MCT110C

    24  Pages

  13. PL3005D

    28  Pages

  14. DD25B

    8  Pages

  15. DD105

    20  Pages

  16. L250H

    24  Pages

  17. L180H High-Lift

    24  Pages

  18. L45G, L50G

    28  Pages

  19. L30G, L35G

    20  Pages

  20. DD31HF-DD38HF

    4  Pages

  21. DD85-DD95

    2  Pages

  22. SD25, SD45

    4  Pages

  23. SD160-SD200

    4  Pages

  24. L30B

    6  Pages

  25. L30B 1000 Pro

    12  Pages

  26. L32B

    6  Pages

  27. L35B Z

    8  Pages

  28. MC60?MC110

    12  Pages

  29. MC60B?MC110B

    16  Pages

  30. L110H, L120H

    28  Pages

  31. L110G, L120G

    32  Pages

  32. L40B, L45B

    6  Pages

  33. L20F, L25F

    16  Pages

  34. Dumper A30F

    24  Pages

Archived catalogs

  1. L60F-L350F

    6  Pages

  2. G900 Series

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.