Mixers - Stirrers
12Pages

Mixers Stirrers Applications VOLLRATH-Mixers and -Stirrers are mainly used to efficiently mix and homogenise either solids into liquids or liquid into liquid. When fitted with the “Lenart-disc” they are well proven as an all-purpose tool in the paint and coatings industry. This type of disc creates an excellent vortex over a large range of viscosities having a relatively high peripheral tip speed (up to 13 m/s). Most different mixing tools are supplied from VOLLRATH for various applications: one-stage or multistage Stirrers as well as butterfly-, grid- and anchor-agitators. Lenart-Disc...

Laboratory-Mixers Type * Explosion proof is not possible. Laboratory- and Pilot-Plant-Mixers Type EWT

Emission Reduction To comply with local environmental and safety regulations our wall and stand mounted mixers are often supplied with lids. The lid is fixed to the machine head on slides. This allows up and down movement of the mixers disc over its working area, to obtain the optimal mixing effect (Vortex), whilst the lid remaining in contact with the vessel/drum. Lids are fitted with large charging chutes allowing ingredients to be added (with the mixer operating) straight into the vortex. Fast incorporation of the ingredients is therefore ensured. Sample: Mixer Type EWG 10 with EC-Type...

Wall- or Stand-Mixers Type Increased lift range and/or different speed range on request. The stand version has a solid foot made of steel to screw the Mixer on the floor of hall. Wall- or Stand-Mixers Type Increased lift range and/or different speed range on request. The stand version has a solid foot made of steel to screw the Mixer on the floor of hall. 5

Wall- or Stand-Mixers Disc B The Stand-Mixer is to fasten on a floor by screws. The jib is shortened at the back and the lift drive is turned to left side. The machine frame is to fix at wall or column by it’s mounting brackets.

Top-Mounted-Stirrers with Lenart-Disc Type EDC 1 FU Top-Mounted-Stirrers with Lenart-Disc Type

Mobile Mixers Type Optional with lift up to 400 mm. Rail-Mixers Type All Rail Mixers optional with lift for mixing tool to optimize mixing effect. Rail-Mixers for 2 rails up to 30 kW Power on request. 8

Stirrers with mounting-bracket for Shipping-Container Propeller B Optional with safety circuit for intermittent operation. Top-Mounted-Stirrers with Universal-Mixing-Disc Type

Top-Mounted-Stirrers Type Top-Mounted-Stirrers Type

Optional in vacuum execution. Different driving power and speed ranges on request. Bottom- and Wall-Scrapers Most of Anchor-Agitators are delivered with Bottomand Wall-Scraper-Segments. They are hinged fastened and pressed against wall by spring load. ● The scraper-segments are alternately fastened to the anchor agitator with two arms, so they equalise tolerances of vessel optimally. The scraper-segments guarantee an outstanding heat transfer in combination with cooling of vessel. Anchor-Agitator with mixing effect for homogenizing, with scraper-segments. Combination of two Agitators:...

Max-Planck-Straße 13 · 50354 Hürth · Germany Phone +49-2233-7989-0 · Fax +49-2233-7989-39 info@vollrath-huerth.de · www.vollrath-huerth.de