Our Multijector Vacuum Pumps of the G- and GL-series are four-stage ejectors and offer an even better efficiency especially at free aspiration and low vacuum. They consist of a light and nevertheless tough modular Aluminium design. As usual for Multijectors, also this pump family can be installed easily: Just connect compressed air- and vacuum line, that‘s all. The G- and GL-series are our top-models for fast evacuation of big volumes and for achieving high suction performance, e. g. for evacuation of casting-, press- and deep-drawing moulds, for vacuum conveying, for suction of abrasives and handling of heavy parts with high leakage risks. Also in the graphical and printing industries they are used successfully - not only for creation of vacuum but often also for fanning out and seperating paper sheets. MULTIJECTOR® G – the optimum if 6 bar operating pressure are available because they are the most efficient. MULTIJECTOR® GL – the safe choice at low operating pressure or if strong pressure variations have to be taken into account because they achieve their maximum vacuum at only 3.5 bar inlet pressure. Standard delivery features All Multijector G- and GL-types are equipped with vacuum- and pressure-gauge a well as with integrated valve and hand switch for turning the pump ON/OFF manually. Furthermore a direct remote control of this Multijector can be done via mini-couplings by a pneumatic signal, only control air is needed. The pump is supplied with an integrated silencer. Order options Suitable vacuum flanges are delivered together with the pump if you choose the order option FL. Please order the pump variant with exhaust air adaptor (order option AA) if the exhaust air shall be drawn off centrally. The optionally integrated vacuum non return valve prevents system vacuum leakage by back-flow through the pump when it is switched off so that the vacuum is held longer (order option H). G-types with Viton gaskets can be ordered with the option V. Test Pumps can be sent to you for trials and approval. The big one. Largest flow, best efficiency. Why compr

Technical data: op. comp. air pres. consump. Suction air flow (in Nl/min) at the respective Vacuum (in mbar) bar Nl/min 0 -100 -200 -300 -400 -500 -600 -700 -800 max. 91 % (-910 mbar) 700 to 21000 Nl/min 2 to 6 bar G-Types opt. 5.6 bar GL-Types opt. 3.5 bar 55 to 80 dB(A) -20 to +60 °C Aluminium, Stainless Steel, Polyethylene-HD, brass, Nitrile, Silicone-free Vacuum: Suction air flow: Operat. pressure: Operating noise: Oper. temp. range: Materialis: max. Vacuum pressure to stated vacuum level (in mbar) bar mbar -100 -200 -300 -400 -500 -600 -700 -800 -900 General data G+GL series Order options...