Screen filter elements
2Pages

{{requestButtons}}

Catalog excerpts

Screen filter elements - 1

Screen filter elements The screen filter elements consist of a support body, a screen element, a screw cap and two flat seals. The filter lengths 496 mm and 508 mm consist of two support bodies that are screwed together using an intermediate piece. Two screen elements are required for this. This structure makes it possible that when a filter change is necessary, only the screen element exposed to dirt has to be replaced and disposed of or cleaned. The remaining parts of the screen filter elements are reusable. The support body and the screw cap are made of polypropylene, the screen elements are made of porous polyethylene or polyamide, depending on the fineness, the flat seals in the standard version are made of Perbunan. The screen filter elements are manufactured without the addition of binding agents or wetting agents. For better differentiation, the different subtleties of the polyamide elements are color-coded. Water treatment Chemical industry Pharmaceutical Industry Electroplating Surface treatment Beverage industry Technical specifications Initial differential pressure in the pure state Flow rate in l / min with one Differential pressure of 0.2 bar based on water (1 cp) Recommended differential pressure for a filter change Food industry Electronics industry Paint and lacquer industry Cosmetic industry Petro-industry Environmental engineering Permissible final differential pressure Due to the inside diameter of the filter elements, the flow rate is max. 90 l / min. limited. Voigt GmbH Filz und Filtertechnik Brühlstraße 6-8 73249 Wernau, Germany Phone Fax E-Mail Internet Reserve technical changes

Open the catalog to page 1
Screen filter elements - 2

Screen filter elements Ordering information (support body without sieve elements) Product group Product group Perbunan Silicone Ordering information (screen elements without support body) Product group Filter material Product group 50 µm (PA, white) 100 µm (PA, blue) 150 µm (PA, brown) 200 µm (PA, green) 350 µm (PA, gray) Porosity (nominal) Voigt GmbH Filz und Filtertechnik Brühlstraße 6-8 73249 Wernau, Germany Phone Fax E-Mail Internet Reserve technical changes (Status: 03/2017)

Open the catalog to page 2

All Voigt GmbH catalogs and technical brochures