Fabric Filter Elements
2Pages

{{requestButtons}}

Catalog excerpts

Fabric Filter Elements - 1

Fabric Filter Elements As standard, the fabric filter elements consist of an inner and outer support body, an outer fabric stocking and two end caps with flat seals or O-rings. The elements are available in 9 different standard lengths, but can also be manufactured in any other length up to max. 1016 mm. Our fabric filter elements are available in 2 material variants (fabric stocking, support tubes and end caps made of 100% polypropylene or 100% polyamide) and in 12 different fineness’s. For both variants, different sealing materials are available as flat seals and as O-rings. Through the use of different adapters, all versions can be used in almost all common filter housings. The flow direction of the elements is from outside to inside. If the fabric filter elements are to be backwashed when installed, we recommend backwash protection to prevent the fabric stocking from tearing open. Technical specifications Initial differential pressure in the pure state Recommended differential pressure for a filter change Permissible final differential pressure Water treatment Chemical industry Pharmaceutical Industry electroplating / surface treatment Beverage and food industry Electronics industry Paint and coatings industry Cosmetic industry Petroindustry Photo industryUmwelttechnik Air and gas filtration application areas Flow rate in l / min at a differential pressure of 0.2 bar based on water (1 cp) µm Due to the inside diameter of the filter elements, the flow rate is limited to max. 90 l / min. Voigt GmbH Filz und Filtertechnik Brühlstraße 6-8 73249 WERNAU, GERMANY Phone Fax E-Mail Internet Reserve technical changes

Open the catalog to page 1
Fabric Filter Elements - 2

Fabric Filter Elements Ordering Information Product group Filter material Product group Filter material Porosity (nominal) beidseitig DOE mit Flachdichtungen Doppel-O-Ring-Adapter 222 und Abschlusskappe Doppel-O-Ring-Adapter 222 und Zentrierspitze Doppel-O-Ring-Adapter 226 und Zentrierspitze Doppel-O-Ring-Adapter 226 und Abschlusskappe Voigt GmbH Filz und Filtertechnik Brühlstraße 6-8 73249 WERNAU, GERMANY Phone Fax E-Mail Internet EPDM Viton Reserve technical changes (Statu

Open the catalog to page 2

All Voigt GmbH catalogs and technical brochures