*mydirectindustry

LAMELLAR PLUGS

Product catalog summary

Overview: This document provides technical specifications for lamellar plugs, including dimensions, materials, and tolerances. All measurements are in millimeters and are subject to technical modifications.

Specifications:

Nominal Sizes and Diameter Ranges: The plugs are available in various nominal sizes ranging from M5 to M24, with corresponding diameter ranges from 4.0 - 5.5 mm to 20.0 - 24.0 mm.
Head and Shaft Dimensions: Each plug has specified head diameters (ØD1), head heights (H1), shaft lengths (H2), and shaft diameters (ØD2). For example, the M5 plug has a head diameter of 8.0 mm and a shaft length of 7.00 mm.
Blind Hole Diameter (ØD3): The blind hole diameters vary from 1.50 mm to 9.30 mm depending on the plug size.
Materials: The plugs are made from different materials, including EPDM (black), NBR (black), and Silicon (red).

Tolerances: General measuring tolerances are in accordance with DIN ISO 3302, section 2 M2F.

Additional Information: The document notes that errors are excepted and technical changes may occur.

Catalog excerpts

Puffer und Stopfen Buffers and plugs LAMELLENSTOPFEN LAMELLAR PLUGS Ø D1 Ø D3 Nennmaß Nominal size Durchmes serbereich Diameter range Kopfhöhe Head height Schaftlänge Shaft length Sackloch Ø Blind hole Ø Material Material Information: EB = EPDM, schwarz ; NB = NBR, schwarz ; SR = Silikon, rot Information: EB = EPDM, black ; NB = NBR, black ; SR = Silicon, red Toleranzen nach (DIN ISO 3302, Teil 2 M2F) Irrtum vorbehalten General measuring tolerances (DIN ISO 3302, section 2 M2F) Errors excepted Alle Abmessungen in Millimeter. All measurements in millimeters. Technische Änderungen vorbehalten. Subject to technical

Open the catalog to page 1

Puffer und Stopfen Buffers and plugs LAMELLENSTOPFEN LAMELLAR PLUGS Ø D1 Ø D3 Durchmes serbereich Diameter range Kopfhöhe Head height Schaftlänge Shaft length Sackloch Ø Blind hole Ø Nennmaß Nominal size Material Material Information: EB = EPDM, schwarz ; NB = NBR, schwarz ; SR = Silikon, rot Information: EB = EPDM, black ; NB = NBR, black ; SR = Silicon, red Toleranzen nach (DIN ISO 3302, Teil 2 M2F) Irrtum vorbehalten General measuring tolerances (DIN ISO 3302, section 2 M2F) Errors excepted Alle Abmessungen in Millimeter. All measurements in millimeters. Technische Änderungen vorbehalten....

Open the catalog to page 2

All A. Vogt GmbH & Co.KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list