*mydirectindustry

VIBER X1™

Product catalog summary

Product Overview: The VIBER X1™ is an analogically designed vibration measurement instrument intended for maintenance and operating staff. It is capable of measuring vibrations in accordance with ISO 10816 standards and assessing bearing conditions. The device is rugged with an IP 65 rating, making it suitable for harsh environments.

Specifications:

Battery Options: Rechargeable lithium or NiMH batteries with a capacity of 2300 mA/h for lithium and 1100 mA/h for NiMH.
Operating Time: Approximately 24 hours for lithium and 12 hours for NiMH batteries.
Frequency Ranges: Four selectable ranges, including 2-1000 Hz and 10-1000 Hz.
Vibration Transducer: Standard accelerometer with 100 mV/g ± 15% sensitivity.
Input Amplitude Range: Maximum 20 g RMS for vibration and 5 gBC for bearing condition.
Dynamic Range: 60 dB at 156.1 Hz.
Accuracy: ± 3% for vibration and ± 5% for bearing condition.
Operating Temperature: -20 to 60 °C.
Weight and Dimensions: 285 grams, 125mm x 70mm x 40mm.

Features:

LED Indicators: Display the selection of measuring range and battery status.
Signal Processing: Analogous with RMS amplitude presentation.
Calibration: Requires recalibration if a different accelerometer is used to maintain accuracy.

Recommendations: It is advised to use the standard accelerometer provided to avoid calibration issues. For more information, users can contact VMI International AB or authorized distributors.

Catalog excerpts

Vibration Measurement Instruments VIBER X1™ Smart products for smart people The analogically designed instrument for maintenance and operating staff. Can be used to compare results in different frequency ranges. Measures both vibrations (ISO 10816) and Bearing Condition. Charger and rechargable batteries. 2 diffrent versions, lihtium or NiMH Bearing Condition and Vibration RMS value 4 selecable frequency ranges Rugged (IP 65) LED’s indicate the selection of measuring range Battery indicator for low voltage For more information, contact VMI International AB or authorized VMI distributor. Visit us at w

Open the catalog to page 1

Vibration Measurement Instruments Technical data Viber XI TM Vibration transducer OBS. You should avoid using other accelerometers because of instrument calibration. If you change the accelerometer, the instrument must be calibrated to preserve the accuracy.

Open the catalog to page 2

All VMI International AB catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list