VIBER M2TM
4Pages

Vibration Measurement Instruments VIBER M2TM SMART PRODUCTS FOR SMART PEOPLE VIBER M2TM is designed for many applications, reliable and easy to use machine protector unit. VIBER M2TM can give an alarm or stop the machine if the set limit of this is achieved. The VIBER M2TM can send machine vibration information as well as transducer and cable condition to a PLC or other receiver. ©SET | ERROR Machine Protector 1 or 2 Channels For more information, contact VMI International AB or authorized VMI distributor. Visit us at www.vmiab.com

Vibration Measurement Instruments 1 or 2 Channels Each channel has:  Three measuring ranges Two independent alarm levels with manual or auto reset Two selectable frequency ranges Current output proportional to the vibration level 4-20 mA, suitable for connection to a PLC Monitoring of transducer and cable failure Analysis signal on BNC and terminal output Common for both channels:  Two independent changeover relays Two independent time delays of relay function One changeover relay for transducer or cable Description The transducer signal is compensated in the input amplifier to correct...

Channel card for accelerometers Input sensitivity Standard 100mV/g: The positive input terminal supplies a 4 mA constant current at max. 20V to the built in transducer amplifier. Frequency range 2 - 4000 Hz are pre set. The lowest frequency range can be changed to 10 Hz on the pc-board. Analysis output 100mV/g between 2 -15000 Hz. Min load 10 k Q. Measuring range Selectable between 0-10, 0-20 or 0-100 mm/s. This selection does not influence the sensitivity of the analysis output. Enclosure dimensions Width 170mm, height 160mm, depth 130mm RMS Value The instrument measures the RMS value of...

Vibration Measurement Instruments VMI International AB Sweden www.vmiab.com