1. Catalogs
  2. VMECA
  3. VP32 Series (VMECA Vacuum Switches)
video corpo

VP32 Series (VMECA Vacuum Switches)

VP32 Series (VMECA Vacuum Switches)

Product catalog summary
Pressure Range: The device supports three pressure ranges: Compound (-100.0 to 100.0 kPa), Negative (-101.3 to 0 kPa), and Positive (0.00 to 1.00 MPa).
Output Type: Options include 2 NPN Output and 2 PNP Output.
Pressure Port: The port is PT1/8" male, M5 female.
Cable Specification: Options include a lead wire type (2M) and an M8-4 Pin male connector.
Analog Output: Available as 1~5V with an option for no analog output.
Power Supply: Requires 12~24 VDC±10% with a ripple of 10% or less.
Environmental Specifications: Operating temperature is 0 to 50℃, and storage temperature is -10 to 60℃. Humidity range is 35~85% RH.
Vibration and Shock Resistance: The device can withstand vibrations of 10Hz-150Hz and shocks of 10G.
Weight: Approximately 80g with a 2M lead wire and 45g with a male connector.
Switch Output: NPN and PNP open collector with a max load current of 125mA and max supply voltage of 30VDC for NPN and 24VDC for PNP.
Indicator Resolution: Various units are supported including kPa, MPa, kgf/cm², bar, psi, and InHg.
Accessories: Options include various connectors and mounting brackets.
Additional Features: Includes output short circuit protection and adjustable hysteresis mode.
See more

Catalog excerpts

VP32 Series (VMECA Vacuum Switches)-1

ACCESSORIES VACUUM Switch Order No. ④ Cable Specification ① Pressure Range • Nomark : Lead wire type (2M) C - Compound (-100.0 ~ 100.0 kPa) • C : M8-4 Pin male connector V - Negative (-101.3 ~ 0 kPa) P - Positive (0.00 ~ 1.00 MPa) ② Output type • 01 - 2 NPN Output 02 - 2 PNP Output ⑤ Analog output Nomark : Without analog output • A : Analog output (1~5V) ※ for Analog type 01 : 1 NPN + 1Analog Output ③ Pressure Port • F1 - PT1/8" male, M5 female • Bracket D : Mounting bracket (BT 3 + BT 4) 2: 2M Lead wire 4: 4 Pin connector • Bracket E : Mounting bracket (PA 3 + PA 4) • Bracket E : Panel adapter + Front protective lid (PA 3 + PA 4 + FPC 2) Operating Specifications Specifications Fluid Setting pressure range Withstand pressure Indicator resolution kgf/㎠ bar psi InHg mmHg Power supply voltage Current consumption Switch output Analog output Repeatabillity (Switch output) Response time Output short circuit protection Indicator accuracy One point set Hysteresis Hysteresis mode Window mode Enclosure Ambient temp. range Ambient humidity range Vibration Shock Temperature characteristic Port size Lead wire Weight 12~24 VDC±10%, Ripple (P-P) 10% or less ≤ 40 mA (with no load) NPN open collector Max. load currunt : 125mA Max. supply volatage: 30VDC Residual voltage : ≤ 1.5V (load currunt 125mA) PNP open collector Max. load currunt : 125mA Max. supply volatage: 24VDC Residual voltage : ≤ 1.5V (load currunt 125mA) Output Voltage: 1~5V ≤ ±2.5%F.S.(within rated pressure range) Linearity : ≤±1% F.S. Output impedance : 1㏀ ≤±0.2% F.S. ±1digit ≤2.5ms (chattering-proof function : 25ms,100ms, 250ms, 500ms, 1000ms, 1500ms selections) Yes ≤±2% F.S ±1 digit (ambient temperature : 25±3℃) Adjustable within 1~8 digits Adjustable within 1~8 digits Fixed (3 digits) IP40 Operation : 0 ~ 50℃, Storage : -10 ~ 60℃ (No condensation or freezing) Operation/ Storage: 35~85% RH (No condensation) Total amplitude 1.5mm or 10G, 10Hz-150Hz-10Hz scan for 1 minute, hours each direction of X,Y and Z 1000 ㎨ (10G), 3 times each indirection of X,Y and Z ≤±2% F.S of detected pressure (25℃) at temp. range 0~50℃ PT 1/8" male, M5 F1: 1/8" PT, M5 Approx. 80g (with 2M lead wire), Approx. 45g (with male connector) Specifications subject to change without notice

 Open the catalog to page 1

All VMECA catalogs and technical brochures

  1. VBF Series

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.