Catalogs >
VMECA >
VMECA Mini - Multiple Pump (X type)

VMECA Mini - Multiple Pump (X type)
4Pages

Catalog excerpts

VACUUM PUMP Minimultiple Pump J§)VM£CAM Vtec Working temperature Noise level 32 Nl/min x N Stack (i.i3scfm xN stack) Main Advantages This X-Minimultiple pump model uses individual pumps to make up the complete unit, each pump is in itself a multi stage ejetor unit. The X-Minimultiple pump has the same external dimensions to that of the M-Minimultiple pump, however the internal ejetor system is different to enable higher levels of vacuum to be achieved. The X- Minimulfjple pump is a pump that bridges the gap between the High Flow VTM pump range and the High Vacuum VTH Range, giving a balance of the two. Each individual pump can be stacked togerher thus creating a modular manifold based system. The advantages of this unit is that it can be operated using just one control valve whilst retaining individual vacuum lines separate to one another, therefore if any leak- age or surface deformation occurs and one pad loses its vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2-16 units depending upon requirements. The pumps can have seal material options of Viton® & EPDM for corrosive and acidic applications. (1) Model - electricity motor pump size © Air supply control valve © Vacuum port, inner dia of tube Vacuum stack x Remark : VTX5 maximum stack up to 16 stack (above 12 stack complete with 2 Silencer) VTX10 maximum stack up to 12 stack (above 6 stack complete with 2 Silencer) DN - DIN type without lead wire DL ~ DIN type with lamp without lead wire * Available only with DC24V Specifications subject to change without notice.

Open the catalog to page 1