SIK N- series
4Pages

safety coupling Radial Loads Couplings of this type have an integrated bearing (1) for saving the drive elements. When mounting it is very important to observe the radial forces (2). By compliance measurement (Srad) the op- • suitable for belt drive timum power division between the rows of balls is guaranteed. • clutch system: hardened steel ln offset mounting it recommends that an additional ball or plain • available function-systems: bearing must be installed. • 360° - single position re-engagement • 60°- multi position SERIEs • full disengagement manual re-engagement maximal radial load (N) CLAMBING RING 0,2 - 15 Nm Specification Adjustment range available from - to (Nm) (approx values) Actuation dist.** SIK N-1-0002 to SIK N-1-0010 with clambing ring ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. Adjustment range available from - to full disengagement (Nm) version (F) (approx values) Overall length (mm) Overall length full disengagement mm) ( Actuation ring Ø (mm) Actuation ring Ø full disengagement mm) ( Clambing fit length (mm) Inner diameter from Ø-Ø H7 (mm) Pilot diameter h7 (mm) Bolt-hole circle diameter ر0,2 Flange outs Ø -0,2 Thread Thread depth (mm) Centering length -0,2 (mm) Distance (mm) Distance (mm) Distance**² full disengagement (mm) **² = The distance (LF ) of a full disengagement version depends on, how much springs are needed. Screw ISO 4762 tightening torque (Nm) Clambing ring Ø (mm) Diameter (mm) Diameter h7 (mm) Distance between centers (mm) Distance (mm) Moment of inertia (10-3kgm2) Approx weight The indeed weight depends on the size of the inner diameter (D).

safety coupling Et at aditium ipsam recte RADIAL LOADS Couplings of this type have an integrated bearing (1) for saving the drive elements. When mounting it is very important to observe the radial forces (2). By compliance measurement (Srad) the opti- • with keyway mounting mumpower division between the rows of balls is guaranteed. ln • suitable for belt drive offset mounting it recommends that an additional ball or plain be- • clutch system: hardened steel aring must be installed. • available function-systems: • 360° - single position re-engagement • 60°- multi position • full...

safety coupling SIK N-3 • with clambing hubs • clutch system: hardened steel • bellows: high grade stainless steel • available function-systems: • 360° - single position re-engagement • 60°- multi position • full disengagement manual re-engagement SERIES 0002 - 0010 WITH ALUMINIUM CLAMBING RING 0,2 - 12 Nm Specification SERIES 0015 - 0060 WITH ALUMINIUM CLAMBING HUB 5 - 80 Nm SERIES 0150 - 1500 WITH STAHL CLAMBING HUB 20 - Adjustment range available from - to (approx values) (Nm) ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the...

Et at aditium ipsam recte safety coupling Et at aditium ipsam recte SIK N-4 • with clambing hubs • clutch system: hardened steel • bellows: high grade stainless steel • available function-systems: • 360° - single position re-engagement • 60°- multi position • full disengagement manual re-engagement SERIES 0015 - 2500 WITH Specification Adjustment range available from - to (approx values) (Nm) SIK N-4-0015 to SIK N-4-2500 with conical hubs ** = The actuation distance applies to the middle actuation range. Also it can go up or down a little bit by the other actuation ranges. Adjustment range...