Battery-powered data logger IDS 620
2Pages

Battery-powered data logger IDS 620 The battery-powered IDS 620 data logger is suitable for installation in places without power supply, e.g. in meter ducts. It is designed for installation on a DIN top-hat rail inside an IP65 plastic housing for wall-mounting. For data transmission, a V.24 interface is available to which an GSM modem can be connected, which, however, is activated only for selection/data transmission. The battery can be exchanged without loss of parameter settings. The accumulator can be recharged by means of solar cells. Software Communication takes place via telecontrol protocol IEC 60870-5-101. Parameterisation of the IDS 620 data logger can be carried out locally via the service interface, using the ACOS ET engineering tool, or through remote parameterisation by means of the IDS HIGH-LEIT SCADA system. IDS 620 has an archive memory designed for approx. 12,000 values. Transmission of archive values to the IDS HIGH-LEIT SCADA system is possible; the time of transmission can be preset during parameterisation. Additionally, IDS 620 has a limit monitoring function for analog values. Accumulators/batteries, the solar module and the GSM module are available as extra accessories. Hardware The IDS 620 data logger is equipped with 4 signal inputs, 4 + 1 analog inputs (one input for monitoring of the battery) and 4 counter value inputs In addition, there is a serial RS232 communication interface and a RS232 service and parameterisation interface IDS 620 data logger

IDS 620 - technical data Hardware Assembly Housing dimensions DIN top-hat rail inside an IP65 plastic housing for wall-mounting W300 x H400 x D200 mm Power consumption without modem 300 µA (Sleep mode) 15 mA (running operation ) Ambient conditions Ambient temperature 0° ... 65° C Air humidity < 95% (non-condensing) Altitude: max. 2000 m Serial communication interface (RS232) Service/parameterisation interface (RS232) Digital Inputs Quantitiy Potential-free contact; supply through IDS 620 Power consumption Analog Inputs Quantity measuring range 10 Bit (0-1024), unipolar, normed for 16 Bits...