ATS controller (VITAC200)

Product catalog summary

Features
VITAC 200 is an electronic controller for the Automatic Transfer Switch (ATS) that ensures continuous power supply by monitoring commercial and emergency power sources. It supports automatic switchover to commercial power when it returns to normal and prevents damage to the ATS by controlling the output time of the control signal. The controller is reliable, having passed EMC tests and includes a self-diagnosis function. It is easy to install on panels of various thicknesses using a screw fastening method.

Rating
The controller operates on AC 220V with a power consumption of under 4W in ordinary conditions and under 5W during switchover. It supports a frequency of 50/60 Hz and measures voltage within a range of 130V to 270V with a precision of ±3%.

Front Configuration
The front panel includes LEDs for power status, switch status, and switchover failure. It also features a rotary switch for setting switchover delay times, an auto/manual selection button, and buttons for switching power sources.

Rear Configuration
The rear panel includes terminals for alarm output, utility voltage input, operating signal output, and status signal input. It measures commercial and emergency power voltages and frequencies with high precision.

Performance
The controller supports both manual and automatic switchover between power sources. Manual switchover requires pressing a button for more than 1.5 seconds, while automatic switchover occurs based on power priority and normal/abnormal power conditions.

Communication Functions
The controller uses RS 232 serial communication (Modbus-RTU) to monitor voltage and frequency, check power status, and adjust major parameters.

Dimensions / Installation
The dimensions of the controller are 180(W)×120(H)×56.6(D) mm. It is installed using M4×L12 bolts and penetrates into the panel.

Connection Wiring Method
Wiring diagrams are provided for ATS-W & WP and ATS-WN types, detailing connections for utility and emergency power, operating signals, and alarm outputs.

Test Result Report
The document includes a section for test results, although specific results are not detailed in the provided text.

Catalog excerpts

Electronic Automatic Transfer Switch Controller CONTENTS Features······················································································ 7-02 A Rating ························································································· A7-04 A Front Configuration··································································· 7-05 A Rear Configuration···································································· 7-06 A Performance········································································

Open the catalog to page 1

Electronic Automatic Transfer Switch Controller Electronic Automatic Transfer Switch Controller VITAC 200 VITAC 200 is equipment connected to the Automatic Transfer Switch (hereafter ATS), which monitors two power supplies and controls the ATS. VITAC 200 is an electronic controller that controls the Automatic Transfer Switch (ATS); it has the following characteristics. Resumes power supply to load by controlling the ATS when power fails, by always monitoring the commercial and emergency power. Reflects the power characteristics of the product installation site by setting the level of commercial...

Open the catalog to page 2

Electronic Automatic Transfer Switch Controller Rating & Front Configuration Rating Specification Rating: AC 220[V] (input range: AC 130[V] ~ 270[V]) Type: Self-power using the power transformer Control Power Power Consumption Frequency Front Configuration and Name of Each Unit Ordinary: Under 4[W] In switchover: Under 5[W] - A-phase voltage of the commercial power - A-phase voltage of the emergency power Measurement Scope Rating Voltage Type Input contact Number of Contacts (3 EA) Type Dry Contact - Switch on state of the commercial power side - Switch on state of the emergency power side -...

Open the catalog to page 3

Electronic Automatic Transfer Switch Controller Rear Configuration & Performance Rear Configuration and Name of Each Unit Measurement Range and Precision Item Display Range Commercial Power Voltage Emergency Power Voltage Commercial Power Frequency Emergency Power Frequency ※ The single-phase voltage of the commercial and emergency power can be measured. Manual Switchover Item Commercial Power Emergency Power 2 Emergency Power Commercial Power Press the emergency on button more than 1.5 seconds (activated only when emergency power is normal) Press the commercial on button more than 1.5 seconds...

Open the catalog to page 4

Electronic Automatic Transfer Switch Controller Communication Functions / Dimension / Installation 180(W)×120(H)×56.6(D) Measurement: Checks the voltage and frequency of the commercial and emergency power. Status monitoring tab: Checks the status of the commercial/emergency power and switch on/off. Settings tab: Checks and changes the current value of major parameters. Communication Functions Electronic Automatic Transfer Switch Controller ※ VITAC 200 penetrates into the panel when installed. M4×L12 bolts are used (based on 3t panel thickness).

Open the catalog to page 5

Electronic Automatic Transfer Switch Controller Connection Wiring Method Connection Wiring Method ATS - W & WP Type Connection Wiring Diagram Connection Wiring Method ATS-WN Type Connection Wiring Diagram ATS-W & WP Type CLOSE Operating Signal Status Signal Comm. Port UTIL EMG InterON ON Lock Com Operating Signal ATS-WN Type Comm. Port Micro-usb Operating Signal Status Signal Alarm Output UTIL EMG InterON ON Lock Com Operating Signal Electronic Automatic Transfer Switch Controller

Open the catalog to page 6

ATS controller (VITAC200)

ATS controller (VITAC200)

Catalog excerpts

All VitzroEM Co., Ltd. catalogs and technical brochures