ATS controller user manual (VITAC200)
15Pages

Thank you for purchasing VITAC 200 ▶ Please make sure to read all safety precautions thoroughly before using this product for proper use of the product. Please provide this user manual to end users and maintenance manager. Please keep this manual in a place where users can easily refer to at any time, after reading this manual. Warranty Information The following is the warranty for the original Vitzro product purchaser. ▶ Warranty conditions The warranty of the Vitzro product lasts 2 years and you can get support for the product itself within that period. Please follow safety precautions to...

1. Overview VITAC 200 is an electronic controller that controls the Automatic Transfer Switch (hereafter “ATS”), and has the following characteristics. Resumes power supply to load by controlling the ATS when power fails, by always monitoring the commercial and emergency power. Reflects the power characteristics of the product installation site by setting the level of commercial and emergency power monitoring. Supports automatic switchover to the commercial power when the commercial power returns to normal level during emergency power operation. Controls the ATS of other companies as the...

3. Product composition 3. 1 Composition of the front unit 3. 2 Composition of the rear unit 1 (Detailed description of the front unit) No. Status, emergency power status display LED Commercial, emergency switch status display LED Switchover interlock2) input status LED Detailed description ☞ Green lamp on : Power on (normal power supply) ☞ Green lamp blinking : Abnormal power (OVR, UVR, OFR, UFR) ☞ Lamp off : Power off, LED damage, product damage ☞ Green lamp on : Open ☞ Red lamp on : On ☞ Green lamp blinking : In switching over (LED of the switched side blinks) ☞ Lamp off : Power off, LED...

4. Major functions VITAC 200 provides measurement and ATS control functions, and major parameters related to ATS control can be modified using engineering software. 4. 1 Measurement functions The single-phase voltage and frequency of the commercial and emergency power can be measured. The following table shows the measurement range and precision. Type Display Range Commercial power voltage Emergency power voltage Commercial power frequency Emergency power frequency 4. 2 ATS control functions VITAC 200 supports the W-Type and WN-Type ATS of VITZRO and various ATS of other suppliers. If VITAC...

5. Major parameters 4. 2. 3 Automatic recovery function The function of changing over to the high priority power automatically even though the currently supplied power is normal, if the power with higher priority becomes normal. This function will be enabled only when the “automatic recovery function” is activated. Please refer to Chapter 5 “Major parameters” regarding “automatic recovery function setting” and “power priority setting”. If the commercial power has higher priority than the emergency power. Automatically changes over to the commercial power side after the time set in...

5. 2 Parameters related to system setting Item Setting range Rated frequency Default value Sets the rated frequency Enable / Disable Sets automatic recovery activation according to power priority Switchover interlock Enable / Disable Sets the activation of the switchover interlock function 2) Installing VICOM-Manager Run the VICOM-Manager installation file to install software at the desired folder. Automatic recovery Power priority Sets power priority Input/Open signal output time Input/Open signal output time Number of retry times Number of retry times Retry times Sets the waiting time to...

② Selecting a VITAC 200 project Select “VITAC_Series” from the recent project. If you cannot find “VITAC_Series” in the recent project, click “Create a new project”. ④ Establishing communication Select the “Device” tab to establish communication. Click “Establish communication” on the left side of the device screen to start communication with VITAC 200. ※ For more information on new project creation, please refer to the VICOM-Manager user manual. ③ Setting communication Select the “Project” tab for communication setting. Set the “communication information” on the right side of the screen as...

6. Dimension ⑤ Checking and modifying major parameters You can check the information or modify the setting value by selecting a menu item located at the left side of VICOM-Manager. - Measurement : You can check the voltage and frequency of the commercial and emergency power. - Status monitoring tab : You can check the status of the commercial and emergency power, and switch on/open status. - Settings tab : You can check the current value of major parameters. To change the setting value, input the value to change and click the “Apply to IED” button. 7. Installation The following figure shows...

8. External connection wiring diagram 8. 1 ATS-W&WP Type connection wiring diagram 8. 2 ATS-WN Type connection wiring diagram

VITAC 200 Head office & factory 327, Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, Korea Tel. +82-31-489-2000 Fax. +82-31-492-2216 Seoul office VITZRO Bldg, 7, Neungdong-ro 25-gil, Gwangjin-gu, Seoul, Korea Tel. +82-2-2024-3100 Fax. +82-2-3436-1900 Busan office 3-109, Industrial Goods Shopping Center, 37, Gwaegam-ro, Sasang-gu, Busan, Korea Tel. +82-51-319-2765 Fax. +82-51-319-2766 Honam office 8, Sangya 3-gil, Naju-si, Jeollanam-do, Korea Tel. +82-61-331-8601 Fax. +82-61-331-8602 Service Center 327, Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, Korea Tel. +82-31-489-2105 Fax....

Head office & factory 327, Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, Korea Tel. +82-31-489-2000 Fax. +82-31-492-2216 Exclusive agency Seoul office VITZRO Bldg, 7, Neungdong-ro 25-gil, Gwangjin-gu, Seoul, Korea Tel. +82-2-2024-3100 Fax. +82-2-3436-1900 Busan office 3-109, Industrial Goods Shopping Center, 37, Gwaegam-ro, Sasang-gu, Busan, Korea Tel. +82-51-319-2765 Fax. +82-51-319-2766 Honam office 8, Sangya 3-gil, Naju-si, Jeollanam-do, Korea Tel. +82-61-331-8601 Fax. +82-61-331-8602 Service Center 327, Byeolmang-ro, Danwon-gu, Ansan-si, Gyeonggi-do, Korea Tel. +82-31-489-2105 Fax....