Vitrek - Scanning Hipot / Electrical Safety Analyzer
1 / 2 PagesView full catalog
Vitrek - Scanning Hipot / Electrical Safety Analyzer
Product catalog summary
Overview: The V5 Scanning Electrical Safety Analyzer by Vitrek is a versatile and cost-effective 5-in-1 electrical safety tester. It combines AC and DC Hipot, insulation resistance, ground bond measurement, and an 8-channel HV scanner in a single unit.
Key Features:
- AC Hipot testing up to 5KV and DC Hipot up to 6KV.
- Insulation resistance testing up to 10 gig-ohms.
- Ground bond measurement up to 42 Amps.
- Built-in 8-channel HV scanner for automated testing.
- Crystal clear LCD interface for easy operation.
- Multi-mode IR capability with selectable test voltages from 50 to 1000V.
- Programmable ramp and dwell times, automatic calibration, and user memory for 160 positions.
- RS232 and optional GPIB interface for system integration.
- Selectable arc detection and Safety Fault Interrupt (SFI) circuit.
- CE mark certified to EN61010 standards.
Performance Specifications:
- AC Hipot: Voltage range 100 to 5000 VAC, current up to 40mA.
- DC Hipot: Voltage range 100 to 6000 VDC, current up to 10mA.
- Insulation Resistance: Voltage options of 50, 100, 500, or 1000V, resistance range 1 to 9999MΩ.
- Ground Bond: Test current 3A to 42A, resistance range 0 to 600mΩ.
General Specifications:
- Test database supports 10 sequences with up to 16 steps each.
- Front panel lockout for secure operation.
- Remote interfaces include RS232, PLC, and optional GPIB.
- Operating temperature range 0°C to 40°C, storage -10°C to 70°C.
- Dimensions: 17”W x 17”D x 5.25”H, weight 39lbs.
Software and Accessories:
- QuickTest™ software for automated test sequence development.
- Various lead sets and adaptors available for purchase.
Ordering Information: The base price for the V5 Scanning Electrical Safety Analyzer is $4990, with additional options and accessories available at varying prices.
See more
Catalog excerpts
AC Hipot Voltage Range: 100 to 5000 VAC RMS Voltage Setting Resolution: 5V/step Voltage Regulation: 1% of reading + 5V Voltage Accuracy: 1% of reading + 10V Voltage Monitoring: At Output Terminals Output Current: 30mA to 40mA 180S max, 0 to 30mA continuous. Below 500V 10mA max Min/Max Current Limits: 0.1 to 40mA Current Accuracy: 1% of reading + 50A With its built-in HV Scanner, the V5 can automatically conduct both Hipot and IR tests on up to 8 different points. Rear panel terminals provide convenient access for Ground Bond testing, while PLC, RS232 and available GPIB interface connectors allow...
Open the catalog to page 2All Vitrek catalogs and technical brochures
Vitrek Catalog48 Pages
V7X SERIES4 Pages
47004 Pages
Archived catalogs
Related Searches
- Electrical safety tester
- Voltmeter
- Motor tester
- Hipot tester
- Digital voltmeter
- Mass testing system
- Portable voltmeter
- High-voltage voltmeter
- Tester for electric safety compliance testing
- Electrically-driven tester
- Fully automated tester for electric safety compliance testing
- Electrical conformity hipot tester
- Multi-point hipot tester
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.