Vitrek - High Voltage Switching System
2Pages

? Increases test throughput? Reduces operator exposure tohigh voltage?Improves test quality, consistencyand repeatability? Enhances end product qualityand reliability? Scan up to 48 points with asingle compact unit? Rated to 7KVDC or 5KVAC ? GPIB/RS232 standard ? May be controlled directly byVitrek Hipot Tester? Available Quick > Test graphical software canget you up and running in no time at all. For those who are are looking for a standalone system, the 948i can be controlled directly by the Vitrek 944i in a PC free environment. So, no matter how you like it Vitrek puts you in control of your automated high voltage test requirement. When a single 948i High VoltageSwitching System is combined with an automated hipot tester, up to 48 test points can be scanned for high voltage isolation. Multiple units make the scanning possibilities virtually unlimited.The 948i is fast and easy to use so thereis no excuse for using the hit-and-miss manual probing method of high voltage testing. The 948i reduces operator exposure to high test voltages while enhancing product quality and reliability. Consistent and repeatable test results are automatically documented making it simple to prove compliance with ISO9000 quality standards.A simple two channel configuration of the948i can handle the vast majority of high voltage scanning applications. The primary consideration is the number of switching points needed to automate the task at hand. The 948i chassis is designed to hold sixof the eight point high volt scanner cards. This allows up to 48 points (typically 24 on the HV bus and 24 on the return bus) to be loaded into a single unit. Setting up the switching pattern for the948i is a snap. The standard GPIB inter- face port allows the system controller to download, verify and activate any desired switching profile you can dream up. Or, if you prefer, an optional RS232 interface is also available. And if programming code is not your ideal way of spending the day, Vitrek Quick Test > ֙ Graphicalprogramming software? CEmark certified to EN 61010 ? Made in the U.S.A. WORLD LEADERS IN COMPLIANCE AUTOMATION > SM size="-3">

Standard Accessories: Operatorsmanual, hipot connection test leads and power cord > Warranty: 1 year parts and labor Form A (SPST, normally open) 8 percard Capacity: Holds up to 6 cards (HV-8 orHC-4)plus one MX-2 input mux card Maximum Input Voltage: 7 KVDC,5KVAC RMS 50-60 Hz Safety: CE mark certified to EN61010 Maximum Current: 3A DC or RMS AC Maximum Switching Power: 50 Watts > Fully loaded 948i shown with six HV-8 switchingcards installed - to form a 2x24 high voltage matrix. Maximum Switching Voltage: 1 KV DCor RMS AC > Remote Interface: GPIB standard,RS232 optional 948i High Voltage...