LED Matrix Display Series LX P6 RGB for industrial use LEDs with excellent luminosity Numbers, characters, symbols, pictures 256 different colors Plenty of different display sizes due to a modular construction Extremely wide viewing angle, Reading distance up to 65 meters Readability even in difficult light conditions Low power consumption Long product life Maintenance free Interfaces: Serial, Ethernet, CAN, PROFIBUS, PROFINET… Simple data protocol to the transfer of information Easy to assemble / install IP54/IP65 For the presentation of: o Machine conditions o Measurement data o Process flows o Temperatures / weights o Operating data Visual Electronic GmbH Warnings and alarms Fault messages Text information Target-performance comparision ………..

1. LED Matrix Modules The LED matrix display family LX P6 RGB is ideal for the visualization of situation-related data in the industry. The used LED matrix modules are characterized by extremely bright SMD LEDs which provide a clear readability even in difficult light conditions, such as direct sunlight. The large viewing angle ensures an excellent reading experience. A LED pixel pitch of just 6 mm guarantees a very good readability at a very low reading distance. The maximum reading distance is determined by the character height. (Character height x 400 = maximum readability) Example: LED vertical:...

5. Models / Order Code Pixel Pitch 6mm (P6) LED display, mounting kit BS L100/200, data sheet including pinouts, LX protocol description / PC operating software Visual Electronic GmbH

* 1 Mounting groove 19 x 3.5 mm * 2 Mounting groove 10.5 x 4.5 mm (for M6) The display can be easily mounted. Mounting slots:• 1 mounting slot at the top (Mounting groove 19 x 3.5 mm) • 1 mounting groove at the bottom (Mounting groove 19 x 3.5 mm) • 2 mounting grooves on the back (Mounting groove 10.5 x 4.5 mm for M6) Included: Mounting kit for mounting the display on existing rear / ceiling plate consisting of: 4 x M6 nuts 4 x M6 screws 2 x square nuts Suspension Eyelets for suspension or ceiling mounting consisting of: 2 x suspension eyelets Mounting kit for mounting in a cutout consisting...

The display can be easily mounted. Mounting slots:• 2 mounting grooves on the back (Mounting groove 10.5 x 4.5 mm for M6)Mounting kit BS L200 Mounting kit for mounting 3 the display on existing rear / ceiling plate consisting of: 4 x M6 nuts 4 x M6 screws 2 x square nuts _ Suspension Eyelets for suspension or ceiling mounting consisting of: 2 x suspension eyelets Wall mounting kit for rear mounting 2 x mounting brackets 4 x M6 nuts 4 x M6 screws Visual Electronic GmbH

9. Connectors Indoor IP54 RS232 / RS485 / Ethernet / Ethernet IP / Profinet Power supply connection 230 VAC 50 Hz Visual Electronic GmbH

11. Further connector IP54 Connectors / IP65 Connectors Due to the large number of different interfaces and thus also connectors, we decided not to describe all plugs in this document. The description of the connectors and mating connectors is part of the delivery. We will be pleased to send you the corresponding descriptions for the following interface connectors IP54/IP65 in advance: • CAN-Bus (.C) • ROFIBUS (.P) • Modbus (.MB) • BCD (.G) • Analog 0..10 V, 4...20 mA (.A) • Timer (.T) / • Temperature (.C) • Counter (.Z) • Speed (.D) Project-specific connectors are also possible and available....

VISUAL ELECTRONIC 13. Models / Order Code The below listed overview shows a first selection of possible solutions. Due to the modular design, countless sizes and designs are available. Displays with 16 LED pixels vertical are suitable for one up to two-line information. Displays with 32 LED pixels vertical can show one up to four-line information. Additional interfaces: ■ A/D-converter ■ Timer ■ BCD/SPS ■ Temperature ■ Counter / Speed Visual Electronic GmbH