*mydirectindustry

DISPLAY COUNTER

Product catalog summary

Product Overview
The LED Display Pulse Counter by Visual Electronic GmbH is suitable for both indoor and outdoor environments. It features a numeric LED display with a visibility range of up to 50 meters, capable of forward and backward counting, adjustable brightness, and a maximum input level of 30 V. The device is encased in an anodized aluminum profile with a reflex-free Plexiglas front panel.

Specifications
- Digit heights: 60 mm and 100 mm
- Operating voltage: 24 VDC (optional 230 VAC)
- Protection class: Indoor IP54, Outdoor IP65
- Operating temperature: 0 to 50 °C (optional -20 to 50 °C)
- Power consumption: Max. 120mA per digit

Order Code and Dimensions
The order code includes digit height, number of digits, power supply, and application area. Dimensions vary based on these factors, with detailed measurements provided for each configuration.

Mounting and Connectors
The device comes with a mounting kit for various installations and uses IP54 connectors for indoor and IP65 for outdoor displays. Connector positions can be customized upon request.

Control Inputs and Signal Inputs
Control inputs include lamp test, blinking control, and reset functions. Signal inputs support adding and subtracting counting, with debounced counter signals.

Parameterization and Settings
Settings can be adjusted using four membrane keys, allowing for digit count, decimal point placement, rounding, counting direction, and debounce time adjustments. All settings are stored in the EEPROM and can be reset if necessary.

Additional Features
Options include automatic brightness control and relay functions for preset and pulse signals. The device supports various timer settings and stop functions at preset values.

Device Options
1. Switches on 4 points
2. Switches to 4 digits
3. Key switch
4. Keypad

CS Code Query
- 0,1: Read a time
- Coding switch (always 1 for key switches)
- 0: New area code applied reset
- 1: Prefix applied immediately at each regulation position

Value Storage
- U: No/Yes (0 = do not store values, 1 = save values)
- Values not saved will be lost at the next reset.
- Factory settings are available.

Mounting Options
- Flush Mounting Kit (EM L): Includes 2 mounting brackets, 4 M6 nuts, 4 M6 screws
- Suspension Eyelets (AOE L): Includes 2 suspension eyelets, 4 M6 nuts, 4 M6 screws
- Wall Mounting Kit (WM L): Includes 2 wall mounting brackets, 4 M6 nuts, 4 M6 screws

Plug Positions
- BS L100/200: At the back
- AOE L100/200: Right, at the top
- WM L100/200: Right, at the bottom
- EM L100: At the back
- Project-specific plug positions available on request.

Dimensional Characters
- Examples: “mm“, “%”, “mbar”, “kg“, “km/h“, “m“, “Min.“
- Note: A dimension character enlarges the display by one digit.

Power Supply
- 230 VAC 50 Hz

Further Interfaces
- Insulation displacement connection, Phoenix Quickon, 3 poles, wires 0.75 - 1.5 mm²
- The L Product Family offers various interfaces such as A/D-Converter, Temperature sensor, Speed/Time/Timer, Counter/rotary encoder, RS 232 / RS 485, CANBUS, Profibus, Ethernet TCP/IP.

Catalog excerpts

LED-GroGanzeige Impulszahler - Produktlinie LZ LED Display Pulse Counter - Product Line LZ Impulszahler Pulse Counter 100 mm - Leseentfernung bis 40-50 Meter - Reading distance up to 40-50 meter 1. Merkmale / Features Uberblick / Funktionen • Numerische LED-GroGanzeige • Anzeige von Zahlimpulsen • Vorwarts- oder Ruckwartszahler • einstellbar, 20 Hz entprellt, Reset • Eingangspegel maximal 30 V • LED 100 mm Ziffernhohe, Farbe rot • 1 Stelle...6 Stellen • Helligkeitswerte einstellbar Gerat • Komplett anschlussbereites Gerat • Aluminium-Profilgehause, eloxiert • Frontscheibe: Reflexfreies Plexiglas • frei wahlbare Befestigung Betriebsspannung • 24 VDC (Option: 230 VAC) Schutzart • INDOOR IP54 (Option: OUTDOOR IP65) Temperatur • 0 bis 50 °C (Option: -20 bis 50 °C) Anschluss • Stecker DSUB, Stecker hinten Signaleingange • Impulse Stromaufnahme • Max. 120mA pro Stelle Informationsdistanz • Maximale Leseentfernung bis ca. 50m Lieferumfang • Anzeige, Bedienungsanleitung, Gegenstecker, Befestigungssatz BS L Overview / Functions • Numeric LED-Display • Pulse Counter Display • Forward or backward counter • Adjustable, 20 Hz debounced, reset • Input level maximum 30 V • LED 100 mm digit height, color rot • 1 digit...6 digits • Brightness values adjustable Device • Fully connected device • Aluminum profile housing, anodized • Front panel: Reflex-free Plexiglas • Freely selectable fastening Operating voltage • 24 VDC (option: 230 VAC) Protection class • INDOOR IP54 (option: OUTDOOR IP65) Temperature • 0 to 50 °C (Option: -20 to 50°C) Connection • DSUB connector at the back of the device Signal inputs • Pulses Power consumption • Max. 120mA per digit Maximum reading distance • Maximum reading distance up to approx. 50m Scope of delivery • Display, operation manual, mating connector, mounting kit BS L Visual Electronic GmbH | Erwin-Dietrich-Str. 5 | D-78244 Gottmadingen | Tel. +49 (0) 7731/977170 |

Open the catalog to page 1

2. Bestellschlussel / Order Code Beispiel / Example Ziffernhohe / Digit height 60 mm 06 Power supply 24 VDC G Einsatzgebiet / Application Indoor I Outdoor O Zeichenhohe / Digit height 60 mm Name Zeichen L x hi x t L x h2 x t Zeichenhohe / Digit height 100 mm Name Zeichen L x h1 x t L x h2 x t Visual Electronic GmbH | Erwin-Dietrich-Str. 5 | D-78244 Gottmadingen | Tel. +49 (0) 7731/977170 | [email protected]

Open the catalog to page 2

4. Montage / Mounting Mounting Kit BS L (Mounting on existing rear / ceiling or floor plate) Mounting kit consisting of: 4 x M6 nut / M6 bolt 2 x Square nut (Included) Befestigungssatz BS L (Befestigung auf vorhandene Ruck-/ Decken- oder Bodenplatte) Befestigungssatz bestehend: 4 x M6 Muttern / M6 Schrauben 2 x Vierkantmutter (Im Lieferumfang enthalten) Ublicherweise werden unsere Indoor-Anzeigen mit den folgenden IP54-Steckern ausgestattet. Projektspezifische Stecker sind auf Anfrage gerne moglich. Unsere Outdoor-Anzeigen werden mit IP65-Steckern ausgestattet. Gerne senden wir Ihnen weitere...

Open the catalog to page 3

6. Einstellungen Anzeige / Parameterization Display The settings of the display can be changed by means of 4 keys. These 4 keys are fitted to the unit as membrane keys. Die Einstellungen des Gerats konnen uber 4 Tasten verandert werden. Diese sind als Folientaster am Gerat angebracht. Aktion Taste M drucken fur 3 Sekunden Wert andern mit auf + und ab - Tasten Position abschliellen mit Weiter ^ Taste Schritte 4 und 5 wiederholen bis zum letzten Eingabewert Vorgang Die Parametrierung wird gestartet Ein Kurzel fur Menupunkt wird kurz angezeigt Der Wert wird angezeigt Kurzel fur nachsten Menupunkt...

Open the catalog to page 4

Beschreibung aller Parameter Diese Einstellungen sind ab Werk voreingestellt und mussen normalerweise nicht verstellt werden. Allgemeine Daten

Open the catalog to page 5

Description of all parameters These settings are preset at the factory and normally need to be adjusted. General data * Factory settings Visual Electronic GmbH | Erwin-Dietrich-Str. 5 | D-78244 Gottmadingen | Tel. +49 (0) 7731/977170 | [email protected]

Open the catalog to page 6

Optionen / Options 1. Montagehilfen / Mounting aids Einbaumontagesatz EM L bestehend aus: 2 x Einbaubugel 4 x M6 Mutter 4 x M6 Schraube Flush Mounting Kit EM L consisting of: 2 x Mounting bracket 4 x M6 nut 4 x M6 screw Aufhangeosen AOE L bestehend aus: 2 Aufhangeosen 4 x M6 Mutter 4 x M6 Schraube Suspension Eyelets AOE L consisting of: 2 x Suspension eyelets 4 x M6 nut 4 x M6 screw Wandmontagesatz WM L Consisting of: 2 x Montagebugel 4 x M6 Muttern 4 x M6 Schraube Wall Mounting Kit WM L Consisting of: 2 x Wall mounting bracket 4 x M6 nut 4 x M6 screw 2. Steckerpositionen / Plug Position Plug...

Open the catalog to page 7

DISPLAY COUNTER

DISPLAY COUNTER

Catalog excerpts

All VISUAL ELECTRONIC GmbH catalogs and technical brochures