VentoFlex
6Pages

VentoFlex Flexible Modular Lighting Tile Bend the Rules of Lighting Design with VentoFlex Tiles For architects and lighting designers with the highest standards, VCC VentoFlex modular lighting system opens up countless ways to make an impact. Featuring a flexible PC board, VentoFlex delivers seamless backlighting, even in challenging interior spaces. VentoFlex Tile Ventoflex Power Cable VentoFlex Bridge Cable VentoFlex Jumper Cable Driver (Not Included) Features ■ Connect up to 10 or 15, 12"x12" VentoFlex LED tiles on a Class 2 LED Driver ■ Dimmable to 1% using any 0-10V/DALI signal ■ LEDs: 144 Luxeon™ CRI>90 ■ Color Temperatures: 2200K, 2700K, 3000K, 3500K, 4000K, 5000K, 5700K ■ Viewing Angle: 140 degrees ■ Luminous Flux = 864lm per square foot ■ Luminous Efficacy = 100 lumens/watt (8.6W per tile) ■ Material: Flexible Copper Clad Laminate (FCCL) PC board ■ Mounting method: Staples/Nail/Screw/Double Sided tape ■ Tool-less snap connectors ■ Modular Connection: Snap buttons, jumper, or bridge cables ■ Operating temperature -13°F - 140°F ■ Suitable for dry and damp locations ■ TM-21 L70 > 60,000 hr ■ Class 2 input only ■ 105°C maximum hot spot temperature (Tc) ■ Works with any 48VDC output LED Driver ■ 5 Year warranty

No hot spots, just unstoppable versatility. VentoFlex Flexible Copper Clad Laminate (FCCL) tiles can be mounted directly to most any non-conductive interior surface with no requirement for a heat sink. Featuring 90 CRI Luxeon™ LEDs in a wide range color temperatures, VentoFlex tiles provide seamless uniform illumination of luminous surfaces at setback distances as low as 2 inches. Versatile Customizable Modular Lighting design without compromise Cut. Shape. Wow. Impact that goes on and on Ambient lighting is all about creating the right mood. VentoFlex helps designers set the exact tone and...

OverviewSpecifications Power Location Indoor, dry and damp location only Operating Voltage 48 VDC Electrical Connections Tool-less snap connectors Base Material Flexible polymide Mounting Mount to any surface Input Voltage 48VDC Dimming Dimming is possible depending on the driver Wattage 5.8watt, 8.6watt Efficacy 120lm/W, 100lm/W (See efficacy table) LED Specifications Photometric Light output (lm) per sheet 691,864 Color Temp 2200K, 2700K, 3000K, 3500K, 4000K, 5000K, 5700K Viewing angle 140 degree viewing angle Color Rendering Index (CRI) >90, R9>50 Lumen Maintenance TM-21 L70 > 60,000 hr

Ordering Instructions VentoFlex Tile Product Category VFT VFT VentoFlex Type of Cut S S Square H Horizontal LED Type S S Static White Color Temperature Part Number Description VentoFlex Square 12" 6W Static White 3500 Kelvin NOTE: 06W: Up to 15 tiles with Class 2 LED Driver | 09W: Up to 10 tiles with Class 2 LED Driver Kelvin Kelvin Kelvin Kelvin Kelvin Kelvin Kelvin VentoFlex Cable Product Category VFT VFT VentoFlex Accessory PC PC Power Cable Can be + or -JC Jumper Cable No Polarity BC Bridge Cable Can be + or - LED Type S S Static White Polarity P01 P01 Positive (+) Red PC/BC N10...

Installation Instructions Trimming Tiles VentoFlex tiles may be cut with scissors, shears or knife at specific lengths unique to each tile design ONLY cut VentoFlex tiles along the dotted lines indicated on the tile Square Tile Horizontal Tile

Installation Instructions Handling Instructions ■ Avoid creasing or repeating bending of VentoFlex tiles. ■ VentoFlex tiles are flexible. Do not bend sheets to a diameter of less than 2 inches (50.8 mm) ■ Do not scrape, rub, or excessively wipe the conductive area between the borders of the tile ■ Handle sheets only by the borders ■ Only mount sheets at mounting locations indicated on the tile - DO NOT puncture the active area of the tile ■ Fasteners should be appropriate for the mounting surface ■ Mount only to non-conductive interior surfaces ■ If using foam tape, apply only along the...