VCC 2010 - Product Catalog
36Pages

2 Operating from our modern facilities in San Diego, California, we combine years of experience in product engineering, design, development, and manufacturing to efficiently meet our customers’ needs. VCC is a fully integrated company that changes the way engineers approach LED mounting solutions. From the design stage to market, we apply cutting-edge technology to turn ideas into results. We offer OEMs and our other customers total collaboration, as well as a single source for mounting LEDs. And we do it faster and at a lower cost than the competition. Through an extensive domestic and...

4 LITEPIPE® www.VCCLITE.com vccsales@vcclite.com 1.800.522.5546 FLX SERIES Panel mounting hole .250” on 3/8” centers. Panel thickness for CLF 280: 1/16” to 1/8”; CLB 300, CLR 301 and SQB 400: 1/32” to 1/4”. For panels less than 3/16” use SPC spacer. Panel Lens-Polycarbonate (UL Rating 94-V2), Spacer and Retaining Ring-Polypropylene. FLX Series shown in picture. U.S. & Foreign Patents Issued. ORDERING CODES ORDERING CODES ORDERING CODES MOUNTING OPTIONS MODEL CMC 441 Standard Fresnel CMS 442 Moisture-Sealed Fresnel CMC 443 Plain End CMS 444 Moisture-Sealed Plain End MODEL CMC 322 Low Profile...

5 LITEPIPE® 1.800.522.5546 vccsales@vcclite.com www.VCCLITE.com LITEPIPE® WITH HORIZONTAL SURFACE MOUNT LED SPECIFICATIONS MATERIAL LITEPIPE® - Acrylic, optical grade, (Clear) Grommet - TPE Spring Clip - Spring Steel (nickel plate) MOUNTING Panel hole: round .171 ½ Dia.(4.34mm). square .180 ½ x .180½ (4.57mm x 4.57mm). rectangular .170 ½ x .250½ (4.34mm x 6.35mm). LITEPIPE® from .200 ½ to .500 ½ use grommet retainer (RTN 150). LITEPIPE ® from .500 ½ to 2.00 ½ the spring clip (RTN250) is recommended for rigidity. LED Surface mount, vertical and horizontal LEDs. LITEPIPE ® products for...

6 LITEPIPE® www.VCCLITE.com vccsales@vcclite.com 1.800.522.5546 THROUGH-HOLE LED APPLICATION Pass LITEPIPE® through panel opening. Press on retaining ring. Air gap .050½ maximum between LED and LITEPIPE ® for best performance. SPECIFICATIONS MATERIAL LITEPIPE® - Acrylic (Clear optical grade) Grommet - TPE DESIGN Low profile, small diameter LITEPIPE ®. MOUNTING Mounts in .102 ½ (2.59mm) hole on 3/16 ½ centers. Use grommet retainer (RTN 100). LED Surface mount, vertical and horizontal LEDs. LITEPIPE® products for blending multicolor LEDs are available. STANDOFF Use standoff to adjust height...

7 LITEPIPE® 1.800.522.5546 vccsales@vcclite.com www.VCCLITE.com SPECIFICATIONS MATERIAL LITEPIPE® - Acrylic (Clear optical grade) CLIPLITE ® Lens - Polycarbonate, Seal - EPDM Lock washer - FH Steel, Nickel plate Ring - Thermoplastic (white) (U.L. Listed Materials ) DESIGN Low profile threaded lens assembly with moisture seal and LITEPIPE®. MOUNTING Mounts in 5/16 ½ (8.0mm) hole on 1/2 ½ centers. Panel thickness 1/32 ½ to 1/8½. Compression of the seal is accomplished by twisting the retaining ring into place. STANDOFF Use standoff to adjust height of standard LED above the PCB in order to...

8 LITEPIPE® www.VCCLITE.com vccsales@vcclite.com 1.800.522.5546 SPECIFICATIONS MATERIAL LITEPIPE® - Acrylic (Clear optical grade) CLIPLITE ® Lens - Polycarbonate, Seal - TPE Retaining Ring - Polypropylene (black) (U.L. Listed Materials) DESIGN Low profile lens assembly with moisture seal and LITEPIPE®. MOUNTING Mounts in .281½ (7.2mm) hole on 3/8 ½ centers. Panel thickness 1/32 ½ to 1/8½. Compression of the seal is accomplished by pressing the retaining ring into place. STANDOFF Use standoff to adjust height of standard LED above the PCB in order to maintain a maximum .050½ clearance...

9 Panel LENSES 1.800.522.5546 vccsales@vcclite.com www.VCCLITE.com SPECIFICATIONS MATERIAL LITEPIPE® - Acrylic (Optical grade) CLIPLITE ® Lens - Polycarbonate Retaining Ring - Polypropylene (U.L. Listed Materials) DESIGN LITEPIPE® (3mm and 5mm) with annular ring and locking tab engages into the annular groove of VCC’s low profile CLIPLITE® lens. The lens mounts the LITEPIPE® securely to the display panel and provides 180 degrees of viewing angle. MOUNTING LITEPIPE ® 3mm - Mates with VCC’s lenses model SMB 200 and SMQ 250. Panel mounting hole .171 (4.3mm) on 1/4 ½ centers. Panel thickness...

10 Panel LENSES www.VCCLITE.com vccsales@vcclite.com 1.800.522.5546 SPECIFICATIONS MATERIAL Lens - Polycarbonate Spacer - Polypropylene (U.L. Listed Materials) DESIGN Standard and low profile lenses with fresnel rings and striated lines. CLR 301 Low Profile Lens is a plain end lens MOUNTING Mounts through front of panel. Mounting holes should be deburred but not chamfered. 3mm (SML 190, SMB 200) mounts in a .171 ½ ± .002 ½ (4.34mm) hole on 1/4 ½ centers. Panel thickness for SML 190, 1/32 ½ to 1/16 ½; SMB 200, 1/16½ to 1/8 ½. 5mm (CLF 280, CLB 300, CLR 301) mounts in a .250 ½ ± .002½...

11 Panel LENSES 1.800.522.5546 vccsales@vcclite.com www.VCCLITE.com SPECIFICATIONS MATERIAL Lens - Polycarbonate Spacer - Polypropylene (U.L. Listed Materials) MOUNTING Mounts through front of panel. Mounting holes should be deburred but not chamfered. 3mm (SMQ 250) mounts in .171½ ± .002½ (4.34mm) round hole on 1/4 ½ centers. Panel thickness from 1/16 ½ to 1/8 ½. 5mm (SQL 360) mounts in .250½ ± .002 ½ (6.35mm) square punched hole on 3/8 ½ centers. Panel thickness from 1/16 ½ to 1/8 ½. 5mm (SQB 400) mounts in .250½ ± .002 ½ (6.35mm) round hole on 3/8 ½ centers. Panel thickness from 1/32 ½...

12 Panel LENSES www.VCCLITE.com vccsales@vcclite.com 1.800.522.5546 SPECIFICATIONS MATERIAL Lens - Polycarbonate Retaining Ring - Polypropylene (U.L. Listed Materials) DESIGN Low profile lenses CMC 313 plain diffused, CMC 321, CML 325 & SMC 170 with fresnel rings. CMC 323 & CML 327 plain end lens. MOUNTING Mounts through front of panel, Retaining ring secures the lens in place. 5mm CMC & CML series mount in a .281½ (7.2mm) hole on 3/8 ½ centers, Panel thickness 1/32 ½ to 1/4 ½. 3mm (SMC 170) mounts in a .171½ (4.4mm) hole on 1/4 ½ centers. Panel thickness 1/32 ½ to 3/32 ½. For add security...