Phantom® VEO
6Pages

when it’s too fast to see, and too important not to. DATA SHEET For the most current version visit www.phantomhighspeed.com Rev November 2017 Subject to change Phantom® VEO Product Family Performance high-speed imaging with models that range from 3Gpx/sec to 7Gpx/sec throughput. Features include Programmable I/O, CFast 2.0 media*, SDI and HDMI video outputs, a large recording buffer and a compact design. Now available with 10Gb Ethernet connectivity. Introducing the Phantom VEO Key Features: Designed to perform in a wide array of scientific and industrial applications, Phantom VEO high-speed cameras provide valuable insight into events that are too fast to be seen with traditional imaging technology. With frame rates that exceed 7,000 frames-per-second (fps) at one-megapixel, VEO 710 and 410 models are perfect for traditional high-speed motion analysis and the four-megapixel VEO 640 and 340 models are ideal for scientific imaging and where higher resolutions are important. Memory: 18GB, 36GB or 72GB RAM Exposure: Minimum exposure is 1 μs on all models; 300 ns exposure time on VEO 710 with FAST option (export controlled). All models support Extreme Dynamic Range (EDR), Auto-Exposure, and Shutter-Off mode for PIV. Available in four performance levels: - VEO 340: 2560 x 1600 @ 800 fps - VEO 410: 1280 x 800 @ 5200 fps - VEO 640: 2560 x 1600 @ 1400 fps - VEO 710: 1280 x 800 @ 7400 fps Phantom VEO cameras go beyond these basic specs with two body styles: Choose the ‘L’ model for basic, software-based imaging in a lab or office environment. Choose the ‘S’ model to take advantage of additional signals, on-camera controls for un-tethered and remote recording, ruggedized connectors and compatibility with removable CFast 2.0 storage media. Available in two body styles: L and S Size: Approximately a 5” (13cm) cube (not including lens mount) These four performance levels and two body styles allow users to choose the best configuration for their project in terms of both features and budget. Rugged design: High-G Rated (non-destructive up to 100G); Milled aluminum housing with electronics isolated from airflow

DATA SHEET Phantom VEO Phantom VEO cameras are packed full of features to enable a variety of applications, including: • • • • • • • • • • • • • Specifications and Features: Video monitoring: Front 3G HD-SDI, HDMI & VF power available on all models. Additional rear 3G HD-SDI port on S models. Provides the following video signals: 720p 50, 59.97, 60; 1080i 25, 29.97, 30; 1080psf 23.976, 24, 25, 29.97, 30; 1080p 23.976, 24, 25, 29.97, 30, 50, 59.97, 60. Connectivity: Gb Ethernet (standard) and 10Gb Ethernet (optional) on all VEO models, for control and download. Both protocols use same...

Imaging Specifications: 640 & 340 models ISO measured according to ISO 12232:2006 method * Recommended Exposure Index (E.I.) range is specified. Set with On-camera controls or PCC software. Higher EI settings are possible using gain and other image tools. Camera Control & File Formats Software: Phantom Camera Control software (PCC) is used for complete setup, control, image processing and download, and includes tracking and motion analysis tools. Cameras are connected on a dedicated Ethernet network. An SDK and Labview drivers are also available for integration for those who require a...

DATA SHEET *Note: FAST option for VEO 710 models is export controlled With up to 72GB of RAM, the Phantom VEO can capture more frames than most. Use multi-cine to segment the memory up to 63 times for fast, uninterrupted capture of shorter events. Download entire 72GB of data in as little as 2 minutes, with the 10Gb Ethernet option and an optimized system. Record durations shown are for cameras with 72GB of RAM at the maximum frame rate. Cameras with 36GB RAM will record for 14 the duration shown and 18GB RAM provides 14 the duration. Lower frame rates provide longer record times. Visit...

when it’s too fast to see, and too important not to. DATA SHEET Phantom® VEO Mechanical Design Additional Specifications The VEO housing is precision-milled out of solid aluminum, making the camera rugged and stable in tough environments. The camera’s cooling system is designed to keep the electrical components completely isolated from the airflow and protected from the outside elements. Power Requirements: Primary power: 16-32 VDC via 6-pin Fischer Secondary power*: down to 12 VDC, via 12-pin capture port (S-models only) Mechanical Specifications: Power draw at max load: 70 Watts (approx.)...