PHANTOM S991
4Pages

Machine Vision Phantom S991 Back View Phantom S991 Front View 4 K High Spe e d Machine V ision 937 fps at 4096 x 2304 resolution CXP-over-Fiber for extreme high-speeds High image quality, with low noise F E AT U R E S & B EN EF I T S DESIGNED FOR EXTREME HIGH-SPEED MACHINE VISION • The Phantom S991 uses renowned Phantom sensor technology to offer both high resolution imaging and high frame rates to achieve 9Gpx/sec (70 Gbps) throughput and over 900 fps at full resolution and 52,000 fps at smaller resolutions. • The S991 employs CoaXPress-over-Fiber (CXPoF) with CXP-12, the latest in high-speed machine vision technology, to deliver high throughput with ease of use. Two simple cables reliably transfer data, with very low latency. • CXP 2.0 protocol is an industry accepted standard and supports extreme high frame rates. PACKED WITH PHANTOM QUALITY • 9 Mpx resolution with a 6.75µm pixel and 12-bit capabilities provides exceptional detail • Phantom image quality offers very low noise and high dynamic range for the clearest images • Flexible, with Rolling and Global shutter, 8-bit or 12-bit selection, and a full selection of signals. Specs Subject to Change | Rev 2 | Nov

FRAME RATES & EXPOSURE 12-bit Sensor Type Maximum Resolution Bit Depth Pixel Size Sensor Size GS: Mono 1,600; Color 400 RS: Mono 1,000; Color 250 GS: Mono 3,200; Color 400 RS: Mono 2,000; Color 250 Minimum FPS CAR Increments Minimum Exposure Electronic Shutter Global Shutter / Rolling Shutter FPS 2 Fiber Banks 1 Fiber Bank Bit Depth Global Shutter Rolling Shutter Global Shutter Rolling Shutter Global Rolling Shutter Shutter Specs Subject to Change | Rev 2 | November 2021

When it’s too fast to see, and too important not to.® CONNECTIVITY & SIGNALS QSFP+ Ports IRIG-B Modulated and Un-modulated Dedicated BNC I/O Signals available on GPIO 0, 1, 2 Ethernet (for programming only) Port Descriptions CONTROL Operational Protocols CXP-12, CoaXPress-over-Fiber (CXPoF),CXP 2.0 protocol compliant Exposure Start Programmed in GenICam and operates as FSYNC Exposure Active Frame state and exposure duration are controlled by an input signal, for synchronizing with systematic processes Metadata Available Phantom S991 with cables Meta data including Event ID, Event timestamp,...

80W 24V power supply included Voltage Range Lens Mounts F Mount standard, EOS, C, M42 and PL Mounts optional Mounting Points Operating Temperature Internal Shutter Standard, for remote black references Storage Temperature Active cooling. Fans can be disabled via Quiet mode. Operational Shock MIL-STD 202H Method 213-B. Rated 30G, sawtooth wave, 11 ms, +/- 10 pulses all axes Operational Vibration MIL-STD-202H Method 214-I; Test Condition A. Rated 7.5 Grms, 15 min/axis Made in the USA CE Emissions – CE Compliant EN 61326-1 CE Immunity – CE Compliant EN 61326-1 FCC – CFR 47, Part 15, Subpart B...