PHANTOM S711
4Pages

MACHINE VISION 1MPX HIGH-SPEED M ACHINE VISION CA MER A Phantom S711 Front View Phantom S711 Back View 7,360 fps at 1280 x 800 resolution CXP-over-Fiber for extreme high-speeds High image quality, with low noise F E ATU R E S & B E N E FITS UNIQUE EXTREME HIGH-SPEED MACHINE VISION • • Very high frame rates: The Phantom S711 offers very high frame rates at large resolutions, packed in a streaming machine vision solution. It achieves almost 250,000 fps at reduced resolutions, supporting a wide range of applications. Ease-of-use: The S711 employs CoaXPress-over-Fiber (CXPoF) with CXP-12, the latest in high-speed machine vision technology, delivering high throughput in an uncomplicated format. Two simple cables reliably transfer data, with very low latency. ADD EFFICIENCY AND FLEXIBILITY WITH MULTIPLE ROI’S • • • Up to 2 flexibly located Regions-of-Interest (ROI) focus on only the most critical parts of the event, reducing the amount of data transferred and allowing higher frame rates. Add flexibility to application setups: ROI’s are flexibly placed in either the top half or bottom half of the image, Increase camera utilization: Each ROI feeds directly to its own frame grabber, allowing the camera to capture 2 events at once. *with export controlled FAST options Specs Subject to Change | Rev

IMAGE & SENSITIVITY Maximum Resolution CAR Increments Pixel Size Sensor Size Bit Depth CMOS, with Global Shutter 128 x 16 (Bank A); 128 x 32 (Banks A & B) 20 μm 25.6 x 16 mm: 30.18 mm diagonal 12 bit, output in either 12-bit or 8 bit EMVA 1288 Measurements (at 532 nm) Standard Mode Quantum Efficiency % Max. SNR (dB) Quantum Efficiency Monochrome and Color Sensor Type SPECTRAL RESPONSE Absolute Sensitivity Threshold (p) Temporal Dark Noise (e-) - Reported measurements were taken at 532 nm with both monochrome and color cameras, using the EMVA 1288 3.1 standard - Visit:...

When it’s too fast to see, and too important not to.® FRAME RATES & EXPOSURE Minimum Exposure 1 µs, 300 ns with FAST option Exposure Features Extreme Dynamic Range (EDR), Auto Exposure Phantom S711 with cables Specs Subject to Change | Rev 1 | 12 202

CONTROL Operational Protocols CXP-12, CoaXPress-over-Fiber (CXPoF),CXP 2.0 protocol compliant Exposure Start Programmed in GenICam and operates as FSYNC Metadata Available Meta data including Event ID, Event timestamp, Event payload can be streamed MECHANICAL Size Lens Mounts F Mount standard, EOS, C, M42 and PL Mounts optional Mounting Points Internal Shutter Standard, for remote black references Active cooling. Fans can be disabled via Quiet mode. 80W 24V power supply included Voltage Range ENVIRONMENTAL Operating Temperature Storage Temperature Operational Shock 30G, sawtooth wave, 11...