PHANTOM S641
4Pages

MACHINE VISION 4MPX HIGH-SPEED M ACHINE VISION CA MER A Phantom S641 Front View Phantom S641 Back View 1490 fps at 2560 x 1600 resolution CXP-over-Fiber for extreme high-speeds High image quality, with low noise F E ATU R E S & B E N E FITS UNIQUE EXTREME HIGH-SPEED MACHINE VISION • • • • The Phantom S641 offers unique capability, providing very high frame rates at a 4 Mpx resolution. It achieves up to 6Gpx/ sec (48 Gbps). Reach up to over 200,000 fps at reduced resolutions, for the power to support cutting edge applications. The S641 employs CoaXPress-over-Fiber (CXPoF) with CXP-12, the latest in high-speed machine vision technology, to deliver high throughput with ease of use. Two simple cables reliably transfer data, with very low latency. 4 Mpx resolution with a 10μm pixel and 12-bit capabilities provide exceptional detail. ADD EFFICIENCY AND FLEXIBILITY WITH MULTIPLE ROI’S • • • Up to 2 flexibly located Regions-of-Interest (ROI) focus on only the most critical parts of the event, reducing the amount of data transferred and allowing higher frame rates. Add flexibility to application setups: ROI’s are flexibly placed in either the top half or bottom half of the image, Increase camera utilization: Each ROI feeds directly to its own frame grabber, allowing the camera to capture 2 events at once. Specs Subject to Change |

IMAGE & SENSITIVITY Maximum Resolution CAR Increments Pixel Size Sensor Size Bit Depth CMOS, with Global Shutter 128 x 4 (Bank A); 128 x 8 (Banks A & B) 10 μm 25.6 x 16 mm: 30.18 mm diagonal 12 bit, output in either 12-bit or 8 bit EMVA 1288 Measurements (at 532 nm) Standard Mode Quantum Efficiency % Max. SNR (dB) Absolute Sensitivity Threshold (p) Quantum Efficiency Monochrome and Color Sensor Type SPECTRAL RESPONSE Temporal Dark Noise (e-) - Reported measurements were taken at 532 nm with both monochrome and color cameras - Visit: www.phantomhighspeed.com/emva for more information on EMVA...

When it’s too fast to see, and too important not to.® FRAME RATES & EXPOSURE Minimum Exposure Exposure Features Extreme Dynamic Range (EDR), Auto Exposure Phantom S641 with cables Specs Subject to Change | Rev 2 | 07 202

CONTROL Operational Protocols CXP-12, CoaXPress-over-Fiber (CXPoF),CXP 2.0 protocol compliant Exposure Start Programmed in GenICam and operates as FSYNC Metadata Available Meta data including Event ID, Event timestamp, Event payload can be streamed MECHANICAL Size Lens Mounts F Mount standard, EOS, C, M42 and PL Mounts optional Mounting Points Internal Shutter Standard, for remote black references Active cooling. Fans can be disabled via Quiet mode. 80W 24V power supply included Voltage Range ENVIRONMENTAL Operating Temperature Storage Temperature Operational Shock 30G, sawtooth wave, 11...