The VC4438 is one of the world‘s fastest and most excellent Smart Cameras with computational power of 8000 MIPS rivalling a 7.2 GHz Pentium. It has 64 MB DRAM, 4 MB Flash EPROM for program and data storage (expanded by the standard 512 MB SD card inside). It can acquire full frame 640 x 480 pixels at 63 frames per second! high-speed: up to 5 µs low-speed: up to 8 s adjustable integration time full frame progressive scan The own internal operating system ’’VCRT’’ of the VC4438 is multitasking. This means that multiple processes can be executed in parallel. FRAME RATE 63 fps (126 fps with 2 times binning) asynchronous, program controlled or external trigger, full frame 8000 MIPS, 1 GHz Texas Instruments TMS320C64xx IMAGE DISPLAY B&W or pseudocolor from 3 x 8 bit RGB lookup table IMAGE/ DATA MEMORY FLASH MEMORY 4 MB Flash EPROM (non volatile memory) for programs and data, programmable in the system 4 inputs / 4 outputs optically decoupled 24 V, outputs 4 x 500 mA RS232 up to 115 . 200 baud max. AND 100 Mbit Ethernet VIDEO OUTPUT SVGA 800 x 600 (VESA standard) SUPPLY VOLTAGE ELECTRICAL CONNECTIONS The Smart Camera has also a High-Speed Trigger input with absolute constant capture delay, which allows absolutely jitterfree image acquisition even at very highspeed processes. And whereas a standard progressive scan camera gets a trigger, starts exposure and then reads out the pixel data, the VC4438 has optimized the image acquisition process so that exposure, read-out and the image processing can be done in parallel. It has an 8 bit colour overlay which can operate in opaque or semitransparent mode so that you can block out or still see the underlying image. All Vision Components Smart Cameras are built for industrial applications. They are insensitive to shock and vibration, and have multiple I/O lines for direct control of external equipment. For more complex control tasks, they can easily be inter-faced to a PLC. No liability is assumed for possible errors!