VS-E5PX7506L-N3
7Pages

{{requestButtons}}

Catalog excerpts

VS-E5PX7506L-N3 - 1

Vishay Semiconductors Hyperfast Rectifier, 75 A FRED Pt® G5 FEATURES Base cathode • Best in class forward voltage drop and switching losses trade off • Optimized for high speed operation • 175 °C maximum operating junction temperature 3 • Polyimide passivation • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS DESCRIPTION / APPLICATIONS Featuring a unique combination of low conduction and switching losses, this rectifier is the right choice for soft switched and resonant converters, as well as medium frequency hard switching converters. This device is specifically designed to improve efficiency of high speed LLC output rectification stages of EV / HEV battery charging stations and high frequency stages of UPS applications. Circuit configuration ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS Repetitive peak reverse voltage Average rectified forward current Non-repetitive peak surge current Repetitive peak forward current Operating junction and storage temperature ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage Reverse leakage current Junction capacitance Series inductance TEST CONDITIONS Measured to lead 5 mm from package body Revision: 08-Feb-2021 Document Number: 96759 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT ww

Open the catalog to page 1
VS-E5PX7506L-N3 - 2

Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER TEST CONDITIONS Peak recovery current Peak recovery current Reverse recovery time Reverse recovery charge Reverse recovery time Reverse recovery charge THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Thermal resistance, junction-to-case TEST CONDITIONS Weight Mounting torque Maximum junction and storage temperature range TJ, TStg Case style: TO-247AD 2L IF - Instantaneous Forward Current (A) Marking device VF - Forward Voltage Drop (V) Fig. 1 - Forward Voltage Drop Characteristics, Per Leg...

Open the catalog to page 2
VS-E5PX7506L-N3 - 3

Allowable Solder Pad Temperature (°C) Vishay Semiconductors 140 130 120 110 Square wave (D = 0.50) rated VR applied IF(AV) - Average Forward Current (A) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage, Per Leg Fig. 4 - Maximum Allowable Case Temperature vs. Average Forward Current, Per Leg Average Power Loss (W) IF(AV) - Average Forward Current (A) Fig. 5 - Forward Power Loss Characteristics, Per Leg ZthJC - Thermal Impedance Junction to Case (°C/W) t1 - Rectangular Pulse Duration (s) Fig. 6 - Transient Thermal Impedance, Junction to Case, Per Leg Revision: 08-Feb-2021 Document...

Open the catalog to page 3
VS-E5PX7506L-N3 - 4

Vishay Semiconductors In this dI/dt range curves are not dependent from applied IF switching current, from 0.5 to 2 times IF(AV) rating Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt, Per Leg Fig. 10 - Typical Reverse Recovery Time vs. dIF/dt, Per Leg 1000 In this dI/dt range curves are not dependent from applied IF switching current, from 0.5 to 2 times IF(AV) rating Fig. 8 - Typical Reverse Recovery Charge vs. dIF/dt, Per Leg Fig. 11 - Typical Reverse Recovery Charge vs. dIF/dt, Per Leg In this dI/dt range curves are not dependent from applied IF switching current, from 0.5 to 2 times...

Open the catalog to page 4
VS-E5PX7506L-N3 - 5

Fig. 13 - Reverse Recovery Waveform and Definitions Notes diF/dt - rate of change of current through zero crossing IRRM - peak reverse recovery current trr - reverse recovery time measured from t0, crossing point of negative going IF, to point t10%, 0.1 IRRM (4) Q - area under curve defined by t and t rr 0 10 % di(rec)M/dt - peak rate of change of current during tb portion of trr ORDERING INFORMATION TABLE Device code Vishay Semiconductors product Package: P = TO-247 package X = hyperfast recovery Package: L = long lead (TO-247AD) Environmental digit: -N3 = halogen-free, RoHS-compliant, and...

Open the catalog to page 5
VS-E5PX7506L-N3 - 6

Outline Dimensions www.vishay.com Vishay Semiconductors TO-247AD 2L DIMENSIONS in millimeters and inches A Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of...

Open the catalog to page 6
VS-E5PX7506L-N3 - 7

Legal Disclaimer Notice www.vishay.com Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any...

Open the catalog to page 7

All VISHAY catalogs and technical brochures

  1. VCNL36825T

    16 Pages

  2. P11H

    7 Pages

  3. T24

    7 Pages

  4. CRHA

    4 Pages

  5. Power Modules

    32 Pages

  6. Bare Die

    29 Pages

  7. Chip Antenna

    6 Pages

Archived catalogs