Catalogs >
VISHAY >
T24

T24
7Pages

Catalog excerpts

Wet Tantalum SMD HI-TMP® Capacitors for +200 °C Operation, Tantalum Metal Case With Glass-to-Tantalum Hermetic Seal FEATURES • Advanced SMD packaging with high volumetric efficiency, patents pending • Enhanced performance, high reliability design • SMD, 100 % tin (RoHS-compliant) • Mounting: surface-mount LINKS TO ADDITIONAL RESOURCES • Increased thermal shock capability of 300 cycles • Designed for oil exploration, avionics, and aerospace applications where > 150 °C operation is required PERFORMANCE CHARACTERISTICS • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Operating Temperature: -55 °C to +85 °C (to +200 °C with voltage derating) DC Leakage Current (DCL Max.): at +25 °C and above: leakage current shall not exceed the values listed in the Standard Ratings table. Capacitance Tolerance: ± 10 %, ± 20 % standard CASE CODE CAPACITANCE TOLERANCE TERMINATION / PACKAGING RELIABILITY GRADE See Standard Ratings table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). C = 100 % tin, 7" (178 mm), reel H = 100 % tin, 7" (178 mm), 1/2 reel U = 100 % tin, 7" (178 mm), partial reel DIMENSIONS in inches [millimeters] CASE CODE Document Number: 40261 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,

Open the catalog to page 1

MARKING VOLTAGE CODE V Polarity mark Capacitance Year Trademark Voltage Week STANDARD RATINGS CAPACITANCE AT 25 °C 120 Hz (μF) CASE CODE PART NUMBER LIFE TEST PERFORMANCE (h AT +200 °C) Note • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, H, U (3) Reliability level: S (4) ESR: S POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR STANDARD PACKAGING QUANTITY UNITS PER REEL CASE CODE 7" FULL REEL C Document Number: 40261 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO...

Open the catalog to page 2

TAPE AND REEL PACKAGING in inches [millimeters] 0.157 ± 0.004 [4.0 ± 0.10] Deformation between embossments Top cover tape For tape feeder reference only including draft. Concentric around B0 10 pitches cumulative tolerance on tape ± 0.008 [0.200] Embossment 0.079 ± 0.002 0.069 ± 0.004 [2.0 ± 0.05] [1.75 ± 0.10] 20° Maximum component rotation (Side or front sectional view) Center lines of cavity P1 USER DIRECTION OF FEED D1 (min.) for components . 0.079 x 0.047 [2.0 x 1.2] and larger (5) Maximum cavity size (1) 20° maximum component rotation Typical component cavity center line Typical...

Open the catalog to page 3

CARRIER TAPE DIMENSIONS in inches [millimeters] CASE CODE RECOMMENDED REFLOW PROFILES Capacitors should withstand reflow profile as per J-STD-020 standard Max. ramp-up rate = 3 °C/s Max. ramp-down rate = 6 °C/s TL Ts max. Preheat area 25 Time 25 °C to peak TIME (s) PROFILE FEATURE LEAD (Pb)-FREE ASSEMBLY Preheat / soak Temperature min. (Ts min.) Ramp-up Ramp-up rate (TL to TP) Time (tL) maintained above TL Peak package body temperature (Tp) Time (tp) within 5 °C of the specified classification temperature (TC) Time 25 °C to peak temperature Ramp-down Ramp-down rate (TP to TL) Time 25 °C to...

Open the catalog to page 4

TYPICAL PERFORMANCE CHARACTERISTICS OF T24 CAPACITORS ELECTRICAL CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Category temperature range -55 °C to +85 °C (to +200 °C with voltage derating) Capacitance tolerance Capacitance change by temperature Limit per Standard Ratings table Limit per Standard Ratings table, at +25 °C, 120 Hz Limit per Standard Ratings table, at -55 °C, 120 Hz Limit per Standard Ratings table Limit per Standard Ratings table, at +85 °C and 40 kHz Reverse voltage Reverse voltage shall be in accordance with MIL-PRF-39006, paragraphs 3.23 and 4.8.19, except DC potential...

Open the catalog to page 5

ENVIRONMENTAL CHARACTERISTICS ITEM POST TEST PERFORMANCE Stability at low and high temperatures The capacitors shall meet the requirements of MIL-PRF-39006 When the capacitors are tested as specified in MIL-PRF-39006, there shall be no evidence of leakage. Moisture resistance MIL-PRF-55365 Method 106 of MIL-STD-202, number of cycles: 10 continuous cycles except that steps 7a and 7b shall be omitted. DC leakage Capacitance change ESR Barometric pressure (reduced) Method 105 of MIL-STD-202, condition E (150 000 feet) (45,720.1 m). There shall be no mechanical or visual damage to capacitors...

Open the catalog to page 6

Legal Disclaimer Notice www.vishay.com Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any...

Open the catalog to page 7