Vishay Spectrol 46.0 mm Diameter Eleven Turn Dial FEATURES • Round vernier scale • 1 13/16" dia. (46.0 mm) • Material: plastic ABS mold • Finish: metallized clear (aluminum) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type Market appliance Dimensions MECHANICAL SPECIFICATIONS Direct to shaft with # 4 to 40 unc hext socket set screw located adjacent to no. 75 on graduated dial Mounting Numeral size: Counter wheel Graduated dial Graduation size: Numeral and every fifth Intermediate Width Weight OPERATIONAL SPECIFICATIONS 1099 turns total. The number in window (0 thru 10) indicates completed number of turn of the drive sleeve. Graduated circular dial indicates the percent of the partial turn of the drive sleeve The number in center of window shall change as graduated dial rotates between 98 and 0 Readout shall increase with CW and decrease with CCW rotation Zero backlash between graduated dial and drive sleeve Readout and operation Transfer point Rotation Accuracy DIMENSIONS in millimeters (inches) PANEL POTENTIOMETER 10 TURN MAX. SHAFT DIAMETER AND ACCOMODATION LEAD FINISH A 1/4" shaft (standard) B 6 mm shaft Metallized clear (aluminium) SAP PART NUMBERING GUIDELINES 21P SHAFT DIAMETER Document Number: 57017 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular...