Catalogs >
VISHAY >
IHXL-1500VZ-5A

IHXL-1500VZ-5A
5Pages

Catalog excerpts

Vishay Dale High Current Through-Hole Inductor, High Temperature FEATURES • High temperature, up to 155 °C • Shielded construction • Frequency range up to 5.0 MHz • Handles high transient current spikes without saturation • Ultra low buzz noise, due to composite construction • AEC-Q200 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Automotive high current filters • Switching regulators • In-line noise filters • Differential mode choke • Boost power factor correction choke • 12 V, 24 V, 48 V DC/DC converters • High current battery charging STANDARD ELECTRICAL SPECIFICATIONS L0 INDUCTANCE ± 20 % AT 500 kHz, 2 V, 0 A (μH) HEAT RATING CURRENT DC TYP. (A) (3) HEAT RATING CURRENT DC TYP. (A) (4) Notes (1) All test data is referenced to 25 °C ambient (2) Operating temperature range -55 °C to +155 °C (3) DC current (A) that will cause an approximate ΔT of 40 °C after one hour (4) DC current (A) that will cause an approximate ΔT of 100 °C after one hour (5) DC current (A) that will cause L to drop approximately 20 % 0 (6) DC current (A) that will cause L to drop approximately 30 % 0 (7) The part temperature (ambient + temp. rise) should not exceed 155 °C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application Document Number: 34568 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMER

Open the catalog to page 1

Vishay Dale DIMENSIONS in inches [millimeters] 1.500 ± 0.010 [38.100 ± 0.254] LEAD DIMENSIONS ± 0.010 [± 0.25] VALUE INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I PRODUCT FAMILY PACKAGE CODE Document Number: 34568 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,

Open the catalog to page 2

Vishay Dale PERFORMANCE GRAPHS Document Number: 34568 3 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT ww

Open the catalog to page 3

Vishay Dale PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY 0.68 µH Document Number: 34568 4 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/do

Open the catalog to page 4

Legal Disclaimer Notice www.vishay.com Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any...

Open the catalog to page 5