IHTH-1500TZ-5A
4Pages

{{requestButtons}}

Catalog excerpts

IHTH-1500TZ-5A - 1

Vishay Dale High Current Through-Hole Inductor, High Temperature Series FEATURES • • • • Shielded construction High temperature, up to 155 °C Excellent DC/DC energy storage up to 2 MHz Filter inductor applications up to SRF (see “Standard Electrical Specifications” table) • Handles high transient current spikes without saturation • Ultra low buzz noise, due to composite construction • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS L0 INDUCTANCE ± 20 % AT 100 kHz, 0.25 V, 0 A (μH) SATURATION HEAT CURRENT RATING DC TYP. CURRENT SRF (A) DC TYP. TYP. (2) (3) (A) (1) (MHz) • 48 V to 12 V input / output filters • Diesel injection drivers • Noise suppression for motors Notes • All test data is referenced to 25 °C ambient • Operating temperature range -55 °C to +155 °C • The part temperature (ambient + temp. rise) should not exceed 155 °C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application (1) DC current (A) that will cause an approximate ΔT of 40 °C (2) DC current (A) that will cause L to drop approximately 20 % 0 (3) DC current (A) that will cause L to drop approximately 30 % 0 Document Number: 34559 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISC

Open the catalog to page 1
IHTH-1500TZ-5A - 2

Vishay Dale INDUCTANCE VALUE INDUCTANCE TOLERANCE GLOBAL PART NUMBER I PACKAGE CODE INDUCTANCE VALUE Document Number: 34559 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORT

Open the catalog to page 2
IHTH-1500TZ-5A - 3

Vishay Dale PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY 6.8 µH Document Number: 34559 3 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/

Open the catalog to page 3
IHTH-1500TZ-5A - 4

Legal Disclaimer Notice www.vishay.com Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any...

Open the catalog to page 4

All VISHAY catalogs and technical brochures

  1. VCNL36825T

    16 Pages

  2. P11H

    7 Pages

  3. T24

    7 Pages

  4. CRHA

    4 Pages

  5. Power Modules

    32 Pages

  6. Bare Die

    29 Pages

  7. Chip Antenna

    6 Pages

Archived catalogs