GLT Web Tension Transducer FEATURES • Capacity range: 20, 50, 100, 200, and 500 lb (9.1, 22.7, 45.4, 90.1, and 227 kg) • Full Wheatstone bridge design eliminates drift and recalibration problems • Accommodates shaft misalignment up to 3° • Rugged, compact size with high overload capability • Measures low resultant tension forces with small wrap angles • Scribe marked for precise alignment with resultant tension force • Wide range of operating tensions • Factory calibration eliminates need for on-site test weights • Simple installation with pillow block or frame mounting • Temperature compensated • FM and CSA approved APPLICATIONS • Converting equipment • Winders/unwinders/rewinders • Coaters/laminators • Printing presses DESCRIPTION BLH Nobel GLT transducers provide stable, accurate, and repeatable performance for low force web tension applications with a wide range of operating tensions, a small wrap angle, or a high roller weight to tension force ratio. Performance improves by 50% versus half bridge semiconductor type cells and drift is basically eliminated. Factory calibration, with closely matched output signals, eliminates field calibration and costly recalibration after the initial setup. Zero and span settings remain stable for tension forces operating at the low end of wide rangeability applications. Scribe marks allow for quick alignment of the GLT with the resultant tension force. Both frame (standard) and optional pillow block mounting configurations are available for dead shaft roller assemblies. GLT series transducers for low-force web tension applications use a differential bending beam transducer with a full Wheatstone bridge for excellent stability, temperature, and performance specifications. Transducers are constructed of stainless steel for durability in corrosive environments. Each unit can be rotated to measure the resultant tension force, not just a component of the force. The full bridge electrical output of each unit is calibrated within a tolerance of better than 0.25%. When coupled with BLH Nobel instrumentation, system calibration can be accomplished without using dead weights or other sources of known force. Zero and span settings also remain stable for tension forces operating at the low end of wide rangeability applications. Technical contact: [email protected], Europe: [email protected], Asia: blhnobel.asia@vpgsen

GLT Web Tension Transducer OUTLINE DIMENSIONS WITH PILLOW BLOCK OPTION TRANSDUCER OUTLINE DIMENSIONS Technical contact: [email protected], Europe: [email protected], Asia: [email protected]

GLT Web Tension Transducer AVAILABLE INSTRUMENTATION High-Speed Precision Display Transmitter with Display Transmitter Profibus or AB Remote I/O Interface Tension Display Left, Right, or Total SPECIFICATIONS PARAMETER PERFORMANCE Capacities Rated output (RO), nominal Operating range Compensated range Effect on zero balance Effect on rated output OVERLOAD RATING Zero balance Ultimate load Safe Side load ELECTRICAL Input resistance Safe load Output resistance Insulation resistance Recommended excitation Maximum excitation DEFLECTION AT RATED CAPACITY All capacities Electrical connector NOTE: Shaft...

Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG...