Analog Rectilinear Displacement Sensor FEATURES • Conductive plastic potentiometer technology. Infinite resolution • Anodized light alloy housing • Precious metal multi-contact wiper • Stainless steel floating shaft • Collar mounting • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type Output type Market appliance Dimensions LINEAR, conductive plastic Output by wires Avionics, industrial Diameter 1/2" (12.7 mm) ELECTRICAL SPECIFICATIONS PARAMETER Total electrical travel (TET) Independent linearity standard Independent linearity optional Tolerance on Rn Temperature coefficient Power rating at +70 °C Wiper current Recommended load impedance Dielectric strength Insulation resistance Useful electrical travel (UET) Total resistance Rn Output smoothness UET - 0 + 0.3 mm ±1% ± 3 %, ± 1 %, ± 0.1 %, ± 0.25 %, ± 0.4 %, ± 0.5 % ± 10 % (± 20 % on request) -300 ppm/°C ± 300 ppm/°C 0.2 W/cm of travel (see Power Rating Chart) ≤ 1 mA ≥ 1000 Rn 500 VRMS, 50 Hz, 1 min ≥ 10 GΩ at 500 VDC 25 mm 50 mm 75 mm 100 mm 1 kΩ to 22 kΩ 1 kΩ to 47 kΩ 2.2 kΩ to 47 kΩ 4.7 kΩ to 100 kΩ ≤ 0.1 % ≤ 0.1 % ≤ 0.1 % ≤ 0.1 % MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel Driving force Driving force with probe (optional) Backlash Protection class Maximum displacement speed Maximum misalignment Useful electrical travel (UET) Total weight Weight of moving part PERFORMANCE PARAMETER Operating temperature range Life Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Document Number: 32525 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,

SAP PART NUMBERING GUIDELINES - PORH12 MODEL SHAFT VERSION In accordance with UET, see “Electrical Specifications” L 8 max. tightening capacity L Shaft body misalignment ± 0.2 mm max. Insulation g26 teflon wires length: 300 Useful electrical travel DESIGNS ON REQUEST (FOR VERSION PORR12) OPTION 1 Document Number: 32525 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in millimeters OPTION 2 141.5 ELECTRICAL DIAGRAM POWER RATING CHART Direction of wiper displacement with shaft extended OPTIONS (on request) • Other travels: UET = 72 mm with TET = 75.2 mm and mechanical travel = 81 mm • Other ohmic value (Rn): 2.2 kΩ; 5 kΩ, 6.5 kΩ • Other linearity • Electrically independent double track (= redundancy) • Middle tap • Electrical phasing (for double track) at U/2: 0.5 U ± 0.7 % U (for PORR12 shaft output at 75.5 mm ± 1 mm), or 0.5 U ± 0.5 % U (for PORR12), or up to ± 0.13 % (track 1 / track 2) (for PORH12) • Electrical bonding: ≤ 0.05 Ω Document Number:...

• Electrical output by connector: plug Socapex: JT 06 RT 835 P023 (or equivalent) with cable length 300 mm, 500 mm, or 750 mm • Specific design to support temperature pic of 200 °C • Other length of shaft: 12 mm (pushed shaft) • Guided shaft • Probe with return spring and tip on request • Other design including diameter 9.5 mm: version RH9.5 • Specific reinforced version for hard environment conditions (vibrations, shocks, temperature): version RR12 • Other wire lengths: 330 mm; 355 mm; 380 mm, and 1 m • Temperature coefficient: -200 ppm/°C ± 200 ppm/°C (in function of ohmic value) • Smaller...

• Option RH12100 with roller pivot Document Number: 32525 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

• Option RH12025 with radial output DIMENSIONS in millimeters 6 wires AWG26 Length: 300 mm 11.2 ± 0.3 (position of middle travel) Green Yellow Green / black Yellow / black • Option with bent sheath 3 max. (possibility of clamping) See note (1) Green Yellow Green / black Yellow / black Note (1) When the shaft is completely pushed, the length exceeds 8 mm (+ 1 mm / 0 mm) Document Number: 32525 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH...

• Option of PORR09 with bent sheath Non-removable modified M6 nut Made from hexagon nut ISO 4032-M6-A4-70 See nut details DETAIL A Heat-shrinkable sleeve for the marking Product identification marking area Index point (U/2): 43 ± 0.5 Pushed axis: 17 ± 0.2 Pulled axis: 69 ± 0.2 Heat-shrinkable sleeves Document Number: 32525 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc

Legal Disclaimer Notice www.vishay.com Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular...