POPR27
POPR27
- Electrical: Theoretical electrical travel (TET) is 345° ± 3°, with options for other angles on request. Total resistance options are 4.7 kΩ or 10 kΩ with a tolerance of ± 20%. Power rating at 70°C is 1.25 W, and the temperature coefficient is -300 ± 300 ppm/°C. Insulation resistance is ≥ 1 GΩ at 500 VDC, and dielectric strength is 750 VRMS.
- Mechanical: The sensor allows for 360° continuous mechanical rotation. It has a moment of inertia ≤ 0.4 g cm² for one stage and ≤ 0.2 g cm² per additional stage. The protection class is IP 50, and the weight is < 18 g for one stage.
- Performance: Operating temperature range is -55°C to +125°C, with a life expectancy of 25 million cycles and a maximum rotation speed of 600 rpm.
Catalog excerpts
Single-Turn Continuous Rotation Analog Displacement Sensor FEATURES • Conductive plastic potentiometer technology, infinite resolution • Servo mount anodized light alloy housing • Precious metal contacts • Stainless steel shaft and bearings • Applicable standards: NFC 93255, MIL R 39023 Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 04-Jan-17 1 Document Number: 32522 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
Open the catalog to page 1
SAP PART NUMBERING GUIDELINES Revision: 04-Jan-17 2 Document Number: 32522 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Open the catalog to page 2
DIMENSIONS in millimeters OPTION 2 Document Number: 32522 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT ww
Open the catalog to page 3
DIMENSIONS in millimeters OPTION 4: 4 CUPS WITH INTERMEDIATE HOUSING Shaft with slot flus with rear side ELECTRICAL DIAGRAM POWER RATING CHART C Clockwise direction viewed from control shaft side OPTIONS (on request) • Other ohmic value: 2 k; 5 k; 50 k • Type of wiper: 5 strands or 2 or 3 lamellas • Protection class: IP 65 (front flange) • Other theoretical electrical travel • Electrical phasing between cups: ± 0.1 % or 0.03 % at U/2 • Connectors (center tap) • Through shaft • Mechanical reference: U/2 printing flange / shaft at ± 10° (by printing or machined hole on the flange) • Shaft:...
Open the catalog to page 4
Legal Disclaimer Notice www.vishay.com Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular...
Open the catalog to page 5All Vishay MCB industrie catalogs and technical brochures
PORH12, PORH9.5, PORR128 Pages
DCRF5 Pages
RCEC 7506 Pages
RCEC 4005 Pages
PP22SA3 Pages
P22S4 Pages
VNPC5 Pages
PRHY124 Pages
RP12 Multi-Turn3 Pages
Multi-Track P22R3 Pages
Lever PMR7 Pages
PP22 SA3 Pages
- Position transducer
- Linear position transmitter
- Linear displacement sensor
- Analog position transducer
- Wire-wound resistor
- Manual potentiometer
- Board-mount resistor
- Rotary potentiometer
- Metal position sensor
- Potentiometer position sensor
- Power resistor
- Analog potentiometer
- Thin-film resistor
- Potentiometer displacement sensor
- Single-turn potentiometer
- SMD resistor