PO Directional Valves DVC0.S08 Valve Series Hybrid SAE Cartridge - 200 bar Technical Data Maximum operating pressure Maximum flow Directional valve - 3/2 spool type Maximum Internal leakage External component treatment O-ring Temperature Range Oil Temperature Range Cross Section Fluids Viscosities Filtration Orientation Installation torque 200 bar 20 l/min 200 cm3 / min @ 200 bar Oxide burnished -30° C to 110° C (standard sealing NBR - BUNA-N) -30° C to 110° C Mineral - based or synthetics with lubricating properties 7,4 to 420 cSt 20/18/15 ISO 4406 (maximum filtration admitted) No restrictions 40 - 45 Nm Technical Specifications for characterization A 3 way 2 positions, spool type, direct acting, screw-in hydraulic, directional cartridge valve. The DVC0.S08 allows flow from 2 to 3. Once suf- Performance Details ficient pressure is applied on port 1, the spool lifts allowing free flow from 1 to 2 while blocking Note: The performance chart illustrates flow handling capacity 2 to 3 and 1 to 2 p/Q curves are recorded at TOil = 40°C and 46 cSt port 3. The rigid design using a 1-piece body contributes to minimize the effect of eccentricities in cavity and provides great reliability. Low pressure drop thanks to optimized flow path. Flow (l/min) Technical Features All external surfaces are corrosion protected. Ordering Code All valve parts are made of high strength steel. Spool and cage are hardened and super-finished to ensure minimal wear and extended service life. Industry commonly used hybrid cavity. Specification may change without notice.