Check Valves CVZ0.S10 Valve Series SAE10 Cartridge - 420 bar Technical Data Maximum operating pressure Maximum flow Direct acting - Poppet type Maximum Internal Leakage External component treatment O-ring Temperature Range Oil Temperature Range Cross Section Fluids Viscosities Filtration Orientation Installation torque 420 bar 60 l/min 0,10 cm3 / min @ 10 bar 0,10 cm3 / min @ 420 bar Zn/Fe - standard (96h) Zn/Ni (720h) -30° C to 110° C (standard sealing NBR - BUNA-N) -30° C to 110° C Mineral - based or synthetics with lubricating properties 7,4 to 420 cSt 20/18/15 ISO 4406 (maximum filtration admitted) No restrictions 55-65 Nm Technical Specifications for characterization A screw-in, cartridge style, direct acting, poppet type check valve. Main use is as a blocking or load-holding device. The CVZ0.S10 allows flow passage Performance Details from port 2 to 1: the cartridge has a fully guided check which is spring-biased closed until sufficient pressure is ap- blocked in the opposite direction (1 to 2). Technical Features All external surfaces are zinc plated and Note: The performance chart illustrates flow handling capacity for each spring bias option. p/Q curves are recorded at TOil = 40°C and 46 cSt plied at port 2 to open to 1. The flow is Cavity Details Flow (l/min) Ordering Code corrosion-proof. All valve parts are made of high strength steel. Poppet is hardened and ground to guarantee minimal wear and to extend service life. Compact size. Optional bias springs for back-pressure application flexibility. Industry common cavity. Specifications may change without notice.