Catalog excerpts
Check Valves CVHG.S08 Valve Series SAE08 Cartridge - 420 bar Technical Data Maximum operating pressure Maximum flow Direct acting - Ball type Cracking pressure Maximum Internal Leakage External component treatment O-ring Temperature Range Cross Section Oil Temperature Range Fluids Viscosities Filtration Orientation Installation torque 420 bar 50 l/min See table below 0,10 cm3 / min @ 10 bar 0,10 cm3 / min @ 420 bar Zn/Fe - standard (96h) Zn/Ni (720h) -30° C to 110° C (standard sealing NBR - BUNA-N) -30° C to 110° C Mineral - based or synthetics with lubricating properties 7,4 to 420 cSt 20/18/15 ISO 4406 (maximum filtration admitted) No restrictions 40 - 45 Nm Technical specifications for characterization A screw-in, cartridge style, direct acting, ball type check valve. Main use is as a blocking or load-holding device. The CVH0.S08 allows flow passage from port 1 to 2: the cartridge has a ful- Performance Details ly guided check which is spring-biased closed until sufficient pressure is apNote: The performance chart illustrates flow handling capacity for each spring bias options. P/Q curves are recorded at TOil = 40°C and 46 cSt plied at port 1 to open to 2. The flow is blocked in the opposite direction (2 to 1). Technical Features Cavity Details Flow (l/min) Ordering Code ted and corrosion-proof. All valve parts are made of high strength steel. Compact size. Industry common cavity. Specification may change without notice.
Open the catalog to page 1All VIS HYDRAULICS SRL catalogs and technical brochures
-
ICV0.M18
1 Pages
-
ICV0.M16
1 Pages
-
CVH0.S10
1 Pages
-
CVH0.S09
1 Pages
-
CVH0.S08
1 Pages
-
CVZ0.S10
1 Pages
-
CVZ0.S09
1 Pages
-
CVZ0.S08
1 Pages
-
CVC0.M22
1 Pages
-
CVC0.M18
1 Pages
-
CVC0.S20
1 Pages
-
CVC0.S16
1 Pages
-
CVC0.S12
1 Pages
-
CVC0.S10
1 Pages
-
CVC0.S09
1 Pages
-
CVC0.S08
1 Pages
-
CVS4.S10
1 Pages
-
CPR
1 Pages
-
SAE08-3
1 Pages
-
SVG0.S08
1 Pages
-
CCS0
1 Pages
-
RVA0.M18
2 Pages
-
PCV0.S10
1 Pages
-
DVC0.S08
1 Pages
-
CVC5.S08
1 Pages