Catalog excerpts
Check Valves CVH0.S10 Valve Series SAE10 Cartridge - 420 bar Technical Data Maximum operating pressure Maximum flow Direct acting - Ball type Cracking pressure Maximum Internal Leakage External component treatment O-ring Temperature Range Cross Section Oil Temperature Range Fluids Viscosities Filtration Orientation Installation torque 420 bar 80 l/min See table below 0,10 cm3 / min @ 10 bar 0,10 cm3 / min @ 420 bar Zn/Fe - standard (96h) Zn/Ni (720h) -30° C to 110° C (standard sealing NBR - BUNA-N) -30° C to 110° C Mineral - based or synthetics with lubricating properties 7,4 to 420 cSt 20/18/15 ISO 4406 (maximum filtration admitted) No restrictions 55-65 Nm Technical Specifications for characterization A screw-in, cartridge style, direct acting,, ball type check valve. Main use is as a blocking or load-holding devi- ce. The CVH0.S10 allows flow passage Performance Details from port 1 to 2: the cartridge has a fully guided check which is spring-biased plied at port 1 to open to 2. The flow is blocked in the opposite direction (2 to 1). Flow (l/min) Cavity Details Note: The performance chart illustrates flow handling capacity. p/Q curves are recorded at TOil = 40°C and 46 cSt closed until sufficient pressure is ap- Ordering Code ted and corrosion-proof. All valve parts are made of high strength steel. Compact size. Industry common cavity. Specifications may change without notice.
Open the catalog to page 1All VIS HYDRAULICS SRL catalogs and technical brochures
-
ICV0.M18
1 Pages
-
ICV0.M16
1 Pages
-
CVH0.S09
1 Pages
-
CVH0.S08
1 Pages
-
CVHG.S08
1 Pages
-
CVZ0.S10
1 Pages
-
CVZ0.S09
1 Pages
-
CVZ0.S08
1 Pages
-
CVC0.M22
1 Pages
-
CVC0.M18
1 Pages
-
CVC0.S20
1 Pages
-
CVC0.S16
1 Pages
-
CVC0.S12
1 Pages
-
CVC0.S10
1 Pages
-
CVC0.S09
1 Pages
-
CVC0.S08
1 Pages
-
CVS4.S10
1 Pages
-
CPR
1 Pages
-
SAE08-3
1 Pages
-
SVG0.S08
1 Pages
-
CCS0
1 Pages
-
RVA0.M18
2 Pages
-
PCV0.S10
1 Pages
-
DVC0.S08
1 Pages
-
CVC5.S08
1 Pages