CVC0.S09
1Pages

Catalog excerpts

Check Valves CVC0.S09 Valve Series Hybrid SAE Cartridge - 420 bar Technical Data Maximum operating pressure Maximum flow Direct acting - Poppet type Cracking pressure Maximum Internal Leakage External component treatment O-ring Temperature Range Cross Section Oil Temperature Range Fluids Viscosities Filtration Orientation Installation torque 420 bar 50 l/min See table below 0,10 cm3 / min @ 10 bar 0,10 cm3 / min @ 420 bar Zn/Fe - standard (96h) Zn/Ni (720h) -30° C to 110° C (standard sealing NBR - BUNA-N) -30° C to 110° C Mineral - based or synthetics with lubricating properties 7,4 to 420 cSt 20/18/15 ISO 4406 (maximum filtration admitted) No restrictions 40-45 Nm Technical Specifications for characterization A screw-in, cartridge style, direct acting, poppet type check valve. Main use is as a blocking or load-holding device. The CVC0.S09 allows flow passage Performance Details from port 1 to 2: the cartridge has a fully guided check which is spring-biased Note: The performance chart illustrates flow handling capacity for significant spring bias options. p/Q curves are recorded at TOil = 40°C and 46 cSt closed until sufficient pressure is applied at port 1 to open to 2. The flow is blocked in the opposite direction (2 to 1). Cavity Details Technical Features All external surfaces are zinc plated and Ordering Code Flow (l/min) corrosion-proof. All valve parts are made of high strength steel. Poppet is hardened and ground to guarantee minimal wear and to extend service life. Compact size. Optional bias springs for back pressure application flexibility. Industry mon 8 com“SAE09”. Specifications may change without noti

Open the catalog to page 1

CVC0.S09 1Pages

Catalog excerpts

All VIS HYDRAULICS SRL catalogs and technical brochures

CVC0.S09
1Pages