TAKE OUT UNIT FOR INJECTION BLOW MOULDING MACHINES description The unit is designed to automatically pick up bottles from a blower and place them on a conveyor belt so they can proceed to the next stage of the process. The standard machine has the following features: - Vacuum conveyor belt - LCD electrical board for parameterization and production control - Painted steel frame - Start cycle expulsion unit - Safety systems Optionals: - Leak tester - Total aseptic line protection - Bottle dust protector SPECIFICATIONS • Indicative production: (on the basis of the machine cycle) • Minimum bottle diameter: (depends on geometry) • Operating temperature: min. 10° max. 50° The above data are to be intended as a mere indication. Indeed, they may vary considerably depending on the type of product to be cut Via Francesco Frediani, 47/3 - 59100 Prato - ITALY - Tel. +39 0574.572373 - Tel. +39 0574.535560 - Fax +39 0574.700193 - www.villanigiovann