Innovation and Leading Technology INDEXING TURNTABLES SUCTION SERIE As a rule, turntable units are designed for the processing of a particular work-piece with an individual degree of automation. For this reason the ECO series is based on a modular system, which provides economical solutions both for manual feeding and also for semi-automatic or fully automatic operation. Linear operating vertical and horizontal nozzle moving devicesincrease the degree of automation of the units. Even the basic version can be equipped with turntables in different sizes to take the parts. The bottom part of the body of the machine is designed as a hopper, which collects the circulating blasting media. This material hopper is fitted with discharge buckets to which the blasting guns are connected. On the back wall of the machine there is an updraft separator that catches residual blasting media, dust and light foreign bodies. After blasting, the parts are blown off by special nozzles in a chamber that is separate from theblasting chamber to remove any residual blasting media. Markets served • General manufacturing • Aerospace and Aviation • Marine • Automotive • Petroleum • Power & Energy • Pharmaceutical The table is driven by a gear motor with frequency converter for table speeds of between 7 and 33 rpm. Because of the modular system, table sizes can be fitted with six, eight, ten or twelve satellites. In the standard version all SA types are fitted with a Scontroller and an OP text display, which can be used to set the important parameters in a reproducibleway and retrieve them. Other PL C controls can be supplied on request. A special blasting media processing system was developed for the SA series and this is fitted with a cascade separator for the undersized particles of blasting media and for dust particles and with a vibro- sieve for foreign bodies.

In addition to hand blasting cabinets, ECO turntable units have been in use now for blast cleaning and deburring delicate components. Parts with concealed burrs or parts that must be blasted to particular surface finishes can be economically processed in turntable units. W Specifications Description Number of stations Capacity per station (lb) Turntable diameter Max. part size (diam x H) Overall Lenght (L) Overall Width (W) Overall Height (H) For more details about other options and available accessories, sales, warranties, distribution and service, contact us at :